PandaIS250

how about for spectator? do i still have to send out an email?

RolxuSC400

Yes but with limited information. I will only need to know how many people so I can count for food and your email address so I can send information and the address.

Latah

BossGS4

iTrader: (2)

I'm bringing a Motive Power Bleeder so whoever want's to flush/freshen their brake fluid is welcome to use it.

I recommend the following if you are planning to do this:

Brake Fluid .... ATE Blue will make it EASY to tell if you have completely flushed the line. If you have blue in the car already ATE makes a gold version.

CRC BrakeKleen .... not that pansy CFC friendly stuff either the full nasty BrakeKleen in the red spraycan

A towel to catch the overflow when you remove the adapter pressure head from the master cylinder.

RolxuSC400

Here is who I have on my list as of this point. If you plan on attending and not doing any work PLEASE send me an email anyway with 2 pieces of information: 1) your email address 2) # attending. I will only be sending out logistics in email the first draft is going out tonight. So here is how it shakes out for now, let me know if I have missed anyone. Also for those who havent responded and intend to do work the email is mcelie009@aol.com. If you plan to do work it is important that you respond so we make sure everyone is staged to get their job(s) done.

1. BossGS4
2. AliSC3
3. GRAND_LS4
4. Apex 84
5. orangecar
6. Habious
7. Rare1/LittleGz
8. Seven0Tree
9. Chancellor
10. VAgs430
11. 2002ggpis3
12. FranchiseB
13. mr2tosc4 (maybe)
14. 02GGP IS (maybe)
15. ispimpin (maybe)
16. amorphous (maybe)
17. camelflage (maybe)
18. wowitztai (maybe)

Apex84

Wow even if the maybes don't show, thats a lot of stuff that needs to get installed.

BernieIS

iTrader: (1)

Apex add me to the list.

Apex84

Did you send an email to Mark with your info.

PandaIS250

email sent.

FranchiseB

my exhaust is in the mail, i should have it for wrenchday noproblem. Spring should be comming too.
hopefully ill have my headers and y-pipe to strap up with everything as well

Apex84

Sounds like you'll be having some fun then.

RolxuSC400

That sounds like alot of work but looks like we have a bunch of IS enthusiasts so the tech help should be there. Looks like some serious scheduling on my end to make all this work.

Well I DEFINITELY dont have a welder or sawzall if ur expecting those to make clean install might have to borrow from someone. I Never installed an exhaust on a car but if you feel u can get all that done bring what ya got.

Apex84

Exhaust won't be a problem. I can help you there. You may have to cut the factory bolts on the cat if they are melted, but it's not difficult.

BernieIS

iTrader: (1)

Email Sent

FranchiseB

cool. i dont know what tools ill need, but ill bring the basics (i have a sawzall too).
do we need a spring compressor to do the suspension? itll be interesting to see what we can get done.

Ali SC3

iTrader: (10)

omg if someone turns out to have a welder i will be their new best friend **fingers-crossed**