I wanted to introduce my self
#1
Pole Position
Thread Starter
I wanted to introduce my self
Hi guys
I have a 2005 sc 430 Been on CL for about 3 years now. I live in a suburb of Philadelphia . I will start to watch the post here and see if I can attend any of your events. I would like to join in.
On another issue maybe you could give me some advice I am looking for a qualified shop to install Tein coilovers and able to properly alighn my 2005 sc430 when installed. I live in a suburb of Philadelphia and would consider traveling in the tri state area in order to find the right shop. I would buy the coil overs form them as well. I really need to find a one stop shop. One where I can talk with them regarding what would be the best set up for what i am trying to accomplish. My interest is really ride quality . I have always been a bit apprehensive in lowering the car for fear of tire rub etc. I am running 20 " x 8 " front and 20" X 10" In the rear on Toyo t1 proxys. I just want to improve the ride quality since I lost a bit when I went to 20" RIMS . Better ride then the OEM runflats . I need to have confidence with who ever I allow to work on my car. I have learned from many years of dealing with johnny no nothings that have no idea of what they are doing other then selling something that is in-appropriate for its use. I just dont want to be a guinea pig for profit.
Buddy
I would appreciate any advice
I have a 2005 sc 430 Been on CL for about 3 years now. I live in a suburb of Philadelphia . I will start to watch the post here and see if I can attend any of your events. I would like to join in.
On another issue maybe you could give me some advice I am looking for a qualified shop to install Tein coilovers and able to properly alighn my 2005 sc430 when installed. I live in a suburb of Philadelphia and would consider traveling in the tri state area in order to find the right shop. I would buy the coil overs form them as well. I really need to find a one stop shop. One where I can talk with them regarding what would be the best set up for what i am trying to accomplish. My interest is really ride quality . I have always been a bit apprehensive in lowering the car for fear of tire rub etc. I am running 20 " x 8 " front and 20" X 10" In the rear on Toyo t1 proxys. I just want to improve the ride quality since I lost a bit when I went to 20" RIMS . Better ride then the OEM runflats . I need to have confidence with who ever I allow to work on my car. I have learned from many years of dealing with johnny no nothings that have no idea of what they are doing other then selling something that is in-appropriate for its use. I just dont want to be a guinea pig for profit.
Buddy
I would appreciate any advice
#2
Welcome MrBlister. Def keep your eyes open both here in the NE forum as well as the NELOC forum for events, meets etc. Alot of really cool, down to earth people in both forums. You can check with Batmobile as well as PhillyGS for techs in your immediate area, as they both live in the Philly area.
#3
Driver School Candidate
Join Date: Feb 2009
Location: new york
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hello Mrblister, I just joined today..I lease at Lexus es 250 every 3 years.. I have been doing so since 1992..and I have enjoyed the Lexus es 350 very much ,,,Dealership has been great over the years ...Regards Gordon
Thread
Thread Starter
Forum
Replies
Last Post