End of Summer Meet - Roster, Raffle Items & Meet Activities
#32
Automotive Detailing Services
Courtesy of ADS Mobile, is a gift certificate for a free Exterior Detail Valued at $99*
This detail package is for Lexus Vehicles ONLY and consists of:
wash, light rim, wheel well cleaning, glass, and tire dressing
+Clay Bar (removes oxidation)
+Machine Polish (light scratches, swirls and faded paint)
+Wax
*Mobile service is available at a slight additional charge. Non-SUV's ONLY.
For a complete list of detail services, go to: www.adsmobile.cjb.net or call Phil @ 650-455-8690
This detail package is for Lexus Vehicles ONLY and consists of:
wash, light rim, wheel well cleaning, glass, and tire dressing
+Clay Bar (removes oxidation)
+Machine Polish (light scratches, swirls and faded paint)
+Wax
*Mobile service is available at a slight additional charge. Non-SUV's ONLY.
For a complete list of detail services, go to: www.adsmobile.cjb.net or call Phil @ 650-455-8690
#33
PLP Upper Radiator Panel for IS300
Courtesy of ProLexPerformance in Fremont, 1 IS300 entrant will win an Upper Radiator Panel. Retail value $85.00.
From the R&D division of Pro Lex Performance comes the Upper Radiator Panels for the Lexus IS300 and the European version Lexus IS200. We designed and fabricated these panels using the latest CAD and CAM equipment. These Radiator Panels fit naturally aspirated and forced induction as well as front mount intercooler set ups. It is a bolt-on part that takes less than 20 minutes to install by the average do-it-yourselfer.
The Vented Radiator Panel is designed for use on naturally aspirated engines. The panel creates positive air pressure in the intake trac at speed for increased cold air induction thus improving horsepower. Pictured below is the Vented Radiator Panel, it makes a huge visual impact when compared to the picture also below. Not only does this panel create a visual impact, it plays a vital role in the cooling system.
The non vented radiator panel is designed for use on forced induction engines where improved cooling efficiency is needed especially at higher speeds where the fans cannot provide the airflow, since they are not on, robbing your car of potential horsepower. At low speeds the radiator panel also allows the fans to operate more efficiently as well. By mounting a intercooler in front of the radiator, you not only divert the airflow but also heat up the air that manages to make it to the radiator. This radiator panel prevents the air from rising up over the radiator and loosing crucial horsepower. These Pro Lex Performance Radiator Panels are crafted from industrial grade brushed aluminum for lighter weight and better heat insulation.
Pro Lex Performance Inc. is a refreshment to the Lexus enthusiast that offers exotic race-crafted products. Customer Service, Quality & Price is priority #1 with us and we excel above the competition. Pro Lex Performance is supported by a wealth of available information and experience. Pro Lex Performance offers exciting precision engineered products such as the all new Pro Lex BD-11 and V2-SQ intercooled IS300 Supercharger kit, and other Pro Lex Performance brand products for your Lexus Automobile.
Revolutionize your Lexus with Pro Lex Performance!
.
They can be contacted at 866-8-PROLEX (TOLL FREE) OR www.prolexperformance.com
From the R&D division of Pro Lex Performance comes the Upper Radiator Panels for the Lexus IS300 and the European version Lexus IS200. We designed and fabricated these panels using the latest CAD and CAM equipment. These Radiator Panels fit naturally aspirated and forced induction as well as front mount intercooler set ups. It is a bolt-on part that takes less than 20 minutes to install by the average do-it-yourselfer.
The Vented Radiator Panel is designed for use on naturally aspirated engines. The panel creates positive air pressure in the intake trac at speed for increased cold air induction thus improving horsepower. Pictured below is the Vented Radiator Panel, it makes a huge visual impact when compared to the picture also below. Not only does this panel create a visual impact, it plays a vital role in the cooling system.
The non vented radiator panel is designed for use on forced induction engines where improved cooling efficiency is needed especially at higher speeds where the fans cannot provide the airflow, since they are not on, robbing your car of potential horsepower. At low speeds the radiator panel also allows the fans to operate more efficiently as well. By mounting a intercooler in front of the radiator, you not only divert the airflow but also heat up the air that manages to make it to the radiator. This radiator panel prevents the air from rising up over the radiator and loosing crucial horsepower. These Pro Lex Performance Radiator Panels are crafted from industrial grade brushed aluminum for lighter weight and better heat insulation.
Pro Lex Performance Inc. is a refreshment to the Lexus enthusiast that offers exotic race-crafted products. Customer Service, Quality & Price is priority #1 with us and we excel above the competition. Pro Lex Performance is supported by a wealth of available information and experience. Pro Lex Performance offers exciting precision engineered products such as the all new Pro Lex BD-11 and V2-SQ intercooled IS300 Supercharger kit, and other Pro Lex Performance brand products for your Lexus Automobile.
Revolutionize your Lexus with Pro Lex Performance!
.
They can be contacted at 866-8-PROLEX (TOLL FREE) OR www.prolexperformance.com
#34
Alumapro 12" Subwoofer
Courtesy of Mitcom one entrant will win an Alumapro 12 inch Subwoofer. Retail Value $399.
This speaker will have a special feature created just for this meet. It will have a Lexus logo printed on to the center of the cone.
This is a one off production unit, but if there is a demand it could possibly become a limited production item.
Alumapro 12" Alchemy RX
Impedance=4 ohm
RMS/Peak=500/1000
Fs=31 Hz.
Qms=4.20
Qes=0.60
Qts=0.50
Re=3.8
Vas=3.1 Fr 3
Xmax=15mm
Mitcom/Audio-Video-Home Theater
CTI/Sales Rep.
Contact: mitcom@astound.net
925.939.6839 \ 925.216.0822
This speaker will have a special feature created just for this meet. It will have a Lexus logo printed on to the center of the cone.
This is a one off production unit, but if there is a demand it could possibly become a limited production item.
Alumapro 12" Alchemy RX
Impedance=4 ohm
RMS/Peak=500/1000
Fs=31 Hz.
Qms=4.20
Qes=0.60
Qts=0.50
Re=3.8
Vas=3.1 Fr 3
Xmax=15mm
Mitcom/Audio-Video-Home Theater
CTI/Sales Rep.
Contact: mitcom@astound.net
925.939.6839 \ 925.216.0822
Last edited by RMMGS4; 09-15-03 at 03:13 PM.
#36
ATTENTION: ALL PARTICIPANTS
AS OF 9/14 THERE ARE ONLY 14 SLOTS STILL AVAILABLE FOR ENTRANTS. AFTER THAT THE PARKING LOT WILL BE FULL. THERE WILL BE PLENTY OF STREET PARKING AVAILABLE FOR THOSE THAT CANNOT GET INSIDE.
WE WILL ONLY ALLOW PRE-REGISTERED CARS INTO THE LOT UNTIL 10:30 AM . AFTER THAT TIME IF THERE ARE ANY AVAILABLE SPOTS, WE WILL LET IN ANY NON REGISTERED CARS.
IF A PRE-REGISTERD ENTRANT DOES NOT ARRIVE BY 10:30, WE MAY NOT BE ABLE TO GUARANTEE A PARKING SPOT, HOWEVER YOU WILL BE ELIGIBLE FOR RAFFLE PRIZES, SO LONG AS YOU CHECK IN AT THE REGISTRATION DESK.
PLEASE PM ME IF YOU HAVE ANY QUESTIONS.
As you arrive, please have your screen name ready, as we will have a representative there to check for pre-registration. If you arrive early and the gate isn't open yet, please form a single line outside and once we are done setting the site up we will let cars in asap.
Thanks!
WE WILL ONLY ALLOW PRE-REGISTERED CARS INTO THE LOT UNTIL 10:30 AM . AFTER THAT TIME IF THERE ARE ANY AVAILABLE SPOTS, WE WILL LET IN ANY NON REGISTERED CARS.
IF A PRE-REGISTERD ENTRANT DOES NOT ARRIVE BY 10:30, WE MAY NOT BE ABLE TO GUARANTEE A PARKING SPOT, HOWEVER YOU WILL BE ELIGIBLE FOR RAFFLE PRIZES, SO LONG AS YOU CHECK IN AT THE REGISTRATION DESK.
PLEASE PM ME IF YOU HAVE ANY QUESTIONS.
As you arrive, please have your screen name ready, as we will have a representative there to check for pre-registration. If you arrive early and the gate isn't open yet, please form a single line outside and once we are done setting the site up we will let cars in asap.
Thanks!
Last edited by RMMGS4; 09-15-03 at 01:10 AM.
#37
Napster Shirts
Courtesy of Roxio in Santa Clara, the publisher of the best-selling Digital Media Software, 2 entrants will win rare Original Napster T-shirts.
Roxio will be launching Napster 2.0 by Christmas.
Napster 2.0 will allow users access to up to 500,000 tracks any way they choose; by paying for individual downloads, by monthly subscription, via Internet radio, or in any combination.
For more information go to: www.Roxio.com
Roxio will be launching Napster 2.0 by Christmas.
Napster 2.0 will allow users access to up to 500,000 tracks any way they choose; by paying for individual downloads, by monthly subscription, via Internet radio, or in any combination.
For more information go to: www.Roxio.com
#42
Driver School Candidate
Join Date: Oct 2002
Location: California
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: SC Specific Raffle Items !!!!!!!!
Originally posted by RMMGS4
We have something special coming for you SC folk.
Stay Tuned.
We have something special coming for you SC folk.
Stay Tuned.
okay now im gettin excited..whoo hoo!
#44
exclusive matchup
iTrader: (4)
Courtesy of TM Engineering in Carson CA, one SC (1992-1996) entrant will win a set of High Performance Polyurethane Control Arm Bushings part number S1-2002 (Retail Value 129.99) and a set of Polyurethane Sway Bar Bushings Part number S1-2008(Retail Value 29.99)
******************************************************************
High Performance Polyurethane Control Arm Bushings
Increased road feel and handling characteristics. Replaces worn OE rubber bushings, which are highly susceptible to cracking and deterioration. A sensible (and permanent!) alternative to purchasing $500+ stock replacement control arms!
Daizen Sport Tuning high performance polyurethane control arm bushings eliminate unsafe driving conditions and poor handling by allowing minimal deflection of the control arms during dynamic vehicle operation. Unwanted camber, caster and toe change become a thing of the past, with control arms operating only in their designated arc and suspension travel parameters. The potential for irregular tire wear is greatly reduced, which is usually a result of the inability to properly align the suspension to required alignment specifications.
The rubber composition of the OE bushings is highly susceptible to wear and deterioration over time - hot/cold cycling, road salt and other extreme road conditions will accelerate this condition. This bushing failure problem can occur in as little as 30,000 miles and almost always by 70-80,000 miles.
Some symptoms of this deteriorated bushing problem are: Excessive tire wear; the inability to properly align the vehicle; audible "clunk" noises from floorboard area, especially when turning or backing up; wandering and/or unstable steering especially at higher speeds; unstable braking; vibration at higher speeds.
An increase in braking stability is also achieved, due to the fact that the control arms will not shift or oscillate forward and backward under the extreme lateral loads experienced during heavy braking.
If other suspension upgrades such as springs, struts or sway bars are installed, the benefits of each will be maximized when used in conjunction with our high performance control arm bushings.
Just as with our other polyurethane suspension components, there is no worry of deterioration of the bushings over time with extreme use or with harsh road conditions.
The lower durometer hardness of these bushing sets provide a very acceptable ride, as they were specifically designed with Lexus owners in mind. A significant upgrade in handling is provided, with a minimal effect on overall ride quality. These kits are not like typical aftermarket hard durometer bushing kits, which while improving handling, also noticeably degrade a vehicle's ride quality and comfort level.
******************************************************************
Polyurethane Sway Bar Bushings - OE Direct Replacement
Noticeably improves handling - An economical upgrade that retains the stock sway bar assemblies and hardware. Offers unsurpassed longevity over the stock OE rubber bushings.
Stock rubber sway bar bushings deflect under load, minimizing the effect of the sway bars during cornering. This does not allow the sway bars to provide efficient torsional resistance, resulting in sloppy vehicle handling. High durometer polyurethane provides a minimal amount of deflection, allowing maximum efficiency from the stock sway bar components. An added benefit is that polyurethane does not deteriorate over time or in harsh environments, as is the case with the stock rubber pieces.
All stock sway bars and hardware are retained, with only a simple swap of the bushing assemblies. While not as dramatic of an improvement as a complete sway bar upgrade, these bushings will provide a noticeable increase in vehicle handling.
******************************************************************
Daizen Sport Tuning products are specifically engineered for your distinguished Lexus automobile. Each of these parts has been extensively tested for proper fit, finish and performance, assuring optimum performance and reliability. Our products are designed by discriminating enthusiasts for discriminating enthusiasts. We utilize only the highest quality materials, components and manufacturing processes, resulting in products that meet or exceed OEM specifications.
http://www.daizensporttuning.com/
TMengineering provides installation and repair services as well as offering Major Brand aftermarket parts for most import and domestic vehicles.
www.tmengineering.com
1129 E. Dominguez Street, Suite B
Carson, CA 90746
(310) 537-6800
******************************************************************
High Performance Polyurethane Control Arm Bushings
Increased road feel and handling characteristics. Replaces worn OE rubber bushings, which are highly susceptible to cracking and deterioration. A sensible (and permanent!) alternative to purchasing $500+ stock replacement control arms!
Daizen Sport Tuning high performance polyurethane control arm bushings eliminate unsafe driving conditions and poor handling by allowing minimal deflection of the control arms during dynamic vehicle operation. Unwanted camber, caster and toe change become a thing of the past, with control arms operating only in their designated arc and suspension travel parameters. The potential for irregular tire wear is greatly reduced, which is usually a result of the inability to properly align the suspension to required alignment specifications.
The rubber composition of the OE bushings is highly susceptible to wear and deterioration over time - hot/cold cycling, road salt and other extreme road conditions will accelerate this condition. This bushing failure problem can occur in as little as 30,000 miles and almost always by 70-80,000 miles.
Some symptoms of this deteriorated bushing problem are: Excessive tire wear; the inability to properly align the vehicle; audible "clunk" noises from floorboard area, especially when turning or backing up; wandering and/or unstable steering especially at higher speeds; unstable braking; vibration at higher speeds.
An increase in braking stability is also achieved, due to the fact that the control arms will not shift or oscillate forward and backward under the extreme lateral loads experienced during heavy braking.
If other suspension upgrades such as springs, struts or sway bars are installed, the benefits of each will be maximized when used in conjunction with our high performance control arm bushings.
Just as with our other polyurethane suspension components, there is no worry of deterioration of the bushings over time with extreme use or with harsh road conditions.
The lower durometer hardness of these bushing sets provide a very acceptable ride, as they were specifically designed with Lexus owners in mind. A significant upgrade in handling is provided, with a minimal effect on overall ride quality. These kits are not like typical aftermarket hard durometer bushing kits, which while improving handling, also noticeably degrade a vehicle's ride quality and comfort level.
******************************************************************
Polyurethane Sway Bar Bushings - OE Direct Replacement
Noticeably improves handling - An economical upgrade that retains the stock sway bar assemblies and hardware. Offers unsurpassed longevity over the stock OE rubber bushings.
Stock rubber sway bar bushings deflect under load, minimizing the effect of the sway bars during cornering. This does not allow the sway bars to provide efficient torsional resistance, resulting in sloppy vehicle handling. High durometer polyurethane provides a minimal amount of deflection, allowing maximum efficiency from the stock sway bar components. An added benefit is that polyurethane does not deteriorate over time or in harsh environments, as is the case with the stock rubber pieces.
All stock sway bars and hardware are retained, with only a simple swap of the bushing assemblies. While not as dramatic of an improvement as a complete sway bar upgrade, these bushings will provide a noticeable increase in vehicle handling.
******************************************************************
Daizen Sport Tuning products are specifically engineered for your distinguished Lexus automobile. Each of these parts has been extensively tested for proper fit, finish and performance, assuring optimum performance and reliability. Our products are designed by discriminating enthusiasts for discriminating enthusiasts. We utilize only the highest quality materials, components and manufacturing processes, resulting in products that meet or exceed OEM specifications.
http://www.daizensporttuning.com/
TMengineering provides installation and repair services as well as offering Major Brand aftermarket parts for most import and domestic vehicles.
www.tmengineering.com
1129 E. Dominguez Street, Suite B
Carson, CA 90746
(310) 537-6800
Last edited by rominl; 09-15-03 at 11:50 PM.
#45
Pole Position
Join Date: Jun 2003
Location: California
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Nice. I'm jumping for joy. Seriously. I was wondering if the control arm and anti-roll bar bushings are going to be at the service center. I'm sure all sc owners want to look at the products that improve the squeaky suspension.
Last edited by Buttercup; 09-17-03 at 10:35 PM.