Illuminated Cup Holders
#16
#17
3 hours labor at the going rate, I am sure it was more because they have never done them before, but I would rather have them do it, Instead of me of someone else messing something up. Plus the instructions are in Japanese aside from some pictures.
#18
Racer
What is the going rate these days? $50? $75? More?
Even at $50, that's $150 just for the labor. The unit costs $265 (plus extra for shipping). That's at least $415! Yikes! For something that very few people will see, especially with cups in there.
I'd rather have the lighted threshold plates.
Even at $50, that's $150 just for the labor. The unit costs $265 (plus extra for shipping). That's at least $415! Yikes! For something that very few people will see, especially with cups in there.
I'd rather have the lighted threshold plates.
#20
What is the going rate these days? $50? $75? More?
Even at $50, that's $150 just for the labor. The unit costs $265 (plus extra for shipping). That's at least $415! Yikes! For something that very few people will see, especially with cups in there.
I'd rather have the lighted threshold plates.
Even at $50, that's $150 just for the labor. The unit costs $265 (plus extra for shipping). That's at least $415! Yikes! For something that very few people will see, especially with cups in there.
I'd rather have the lighted threshold plates.
#26
Racer
iTrader: (2)
I just purchased this for my wife's NX. I should have it hopefully in a few weeks. I'll post pictures once I receive it and hopefully do an install/pics of things apart that might help others.
From asking different member one thing I will be doing is wrapping the discs with 3m clear vinyl so that way keys and other such metal things won't scratch the plates up and make them look like ***.
There's already a video floating around on how to remove the center console so that shouldn't be too hard of a process to do. I'm wondering in terms of which wire to tap. Hopefully there are already connections there but we'll see here once I dive into it.
-Nigel
From asking different member one thing I will be doing is wrapping the discs with 3m clear vinyl so that way keys and other such metal things won't scratch the plates up and make them look like ***.
There's already a video floating around on how to remove the center console so that shouldn't be too hard of a process to do. I'm wondering in terms of which wire to tap. Hopefully there are already connections there but we'll see here once I dive into it.
-Nigel
#27
Racer
iTrader: (2)
I made a thread when I installed mine but figured I'd add to this one, even though it's a tad old.
Install wasn't bad. Took me a little time to figure out the dimming/power wires but nothing a multi meter didn't help with. Sorry for the crappy pictures.
Looks really cool. You DO loose a little bit of the cup holder depth because the inserts are about 3/4" tall but overall a really cool mod that makes the interior nicer.
-Nigel
Install wasn't bad. Took me a little time to figure out the dimming/power wires but nothing a multi meter didn't help with. Sorry for the crappy pictures.
Looks really cool. You DO loose a little bit of the cup holder depth because the inserts are about 3/4" tall but overall a really cool mod that makes the interior nicer.
-Nigel
Thread
Thread Starter
Forum
Replies
Last Post