NX - 1st Gen (2015-2021)

Power Back Door Wouldn't Open

Thread Tools
 
Search this Thread
 
Old 01-15-18 | 07:06 PM
  #1  
fredw1's Avatar
fredw1
Thread Starter
Intermediate
 
Joined: Dec 2008
Posts: 295
Likes: 18
From: OH
Default Power Back Door Wouldn't Open

I couldn't find anything in the Owner's Manual to explain what happened today. It had snowed about an inch, I started the car, and tried to open up the power back door to get my snow squeegee out. Nothing happened when I pushed the button on the dashboard, the release on the outside of the door, or my key fob. On the sixth attempt, which was with the button on the outside on the door, it finally opened. I have no idea why the other attempts wee unsuccessful. has this happened to anyone else?
Old 01-16-18 | 05:39 AM
  #2  
TorontoIS's Avatar
TorontoIS
Lexus Test Driver
 
Joined: Sep 2006
Posts: 897
Likes: 11
From: ON
Default

I haven't yet had this happen, hopefully there is an explanation out there. Let us know if it happens again.
Old 01-16-18 | 12:02 PM
  #3  
GS3Tek's Avatar
GS3Tek
Moderator
iTrader: (8)
 
Joined: Jan 2003
Posts: 12,364
Likes: 168
From: so cal
Default

Keep in mind on cold days, the weather seals can be stuck together. After several attempts of trying to lift open, it probably cleared itself and finally open..
Just a theory.

Happens to me a couple of time (with my van though) it cold weather/out in the snow...
Old 01-17-18 | 08:09 AM
  #4  
fredw1's Avatar
fredw1
Thread Starter
Intermediate
 
Joined: Dec 2008
Posts: 295
Likes: 18
From: OH
Default

Originally Posted by GS3Tek
Keep in mind on cold days, the weather seals can be stuck together. After several attempts of trying to lift open, it probably cleared itself and finally open..
Just a theory.

Happens to me a couple of time (with my van though) it cold weather/out in the snow...
Thanks for that thought. That occurred to me, but it was 32 degrees, and the freezing seals has been a problem once in a while in the past after a car wash and a temperature drop into the 20s.
Old 01-17-18 | 10:49 PM
  #5  
computerwi's Avatar
computerwi
Advanced
 
Joined: Jun 2009
Posts: 639
Likes: 49
From: Alberta
Default

Mostly likely the seals were frozen. The power mechanism is very sensitive when opening... not so much for when closing though...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thedwp
NX - 1st Gen (2015-2021)
10
04-11-15 09:49 PM
gs350trev
RX - 2nd Gen (2004-2009)
10
07-28-14 11:00 AM
CameronLax
LS - 1st and 2nd Gen (1990-2000)
3
12-15-10 12:33 PM
toppower
RX - 2nd Gen (2004-2009)
13
11-29-07 10:02 PM




All times are GMT -7. The time now is 02:38 AM.