Pimp my ride
03-30-24, 05:37 PM
#31
For the NX back of the vehicle, there's a metal area near the tail gate. I'm trying to find if there's a straight PPF or film I can apply on it. It will likely get scratched a lot.
03-30-24, 08:44 PM
#32
Pit Crew
Thread Starter
Found it, on page 5 lol it has been a while, anyway here it is, take a look, I just ordered one myself haha -> https://www.clublexus.com/forums/nx-...tion-film.html
Last edited by oreon333; 03-30-24 at 09:18 PM.
03-31-24, 04:11 PM
#33
We already discussed that on some other thread, you can buy one for that area from AliExpress for like $60 or you can get some wide PPF tape they also sell for a few bucks, but do not think it will look pretty. I will see if I can find the thread we were talking about that area on the back.
Found it, on page 5 lol it has been a while, anyway here it is, take a look, I just ordered one myself haha -> https://www.clublexus.com/forums/nx-...tion-film.html
Found it, on page 5 lol it has been a while, anyway here it is, take a look, I just ordered one myself haha -> https://www.clublexus.com/forums/nx-...tion-film.html
03-31-24, 04:13 PM
#34
Sounds like the dealership didn't remove the factory protective film. Just rip that off, carefully.
I bought a similar glass screen protector from Amazon as well. Fits well, works well. If you find the screen isn't sensitive enough, you can set the touch sensitivity in the settings. Intent is for use of gloves in winter, but will work for this.
I bought a similar glass screen protector from Amazon as well. Fits well, works well. If you find the screen isn't sensitive enough, you can set the touch sensitivity in the settings. Intent is for use of gloves in winter, but will work for this.
06-15-24, 12:53 PM
#37
RGB HaloKits from local shop
Alright folks,
I've had this installed on my NX for almost 6 months now, and so far, so good—no issues. And please, no judgments, lol. I had my local shop install it. Here's the product link: Flow Series Interior Dash Trim Kit.
I've had this installed on my NX for almost 6 months now, and so far, so good—no issues. And please, no judgments, lol. I had my local shop install it. Here's the product link: Flow Series Interior Dash Trim Kit.
The following users liked this post:
NX450Guy (06-15-24)
06-15-24, 01:31 PM
#38
Alright folks,
I've had this installed on my NX for almost 6 months now, and so far, so good—no issues. And please, no judgments, lol. I had my local shop install it. Here's the product link: Flow Series Interior Dash Trim Kit.
I've had this installed on my NX for almost 6 months now, and so far, so good—no issues. And please, no judgments, lol. I had my local shop install it. Here's the product link: Flow Series Interior Dash Trim Kit.
The following users liked this post:
AM123 (06-15-24)
06-17-24, 02:02 PM
#39
Great thread!
Nothk g fancy on the wife’s NX450h+..22” Vossen rims and lowered with RS-R Coilover’s and also RS-R rear upper links to correct the camber from lowering. Also added Lexus puddle lights. Considering doing the screen protection..BBK upgrade and swap out to better speakers.
Nothk g fancy on the wife’s NX450h+..22” Vossen rims and lowered with RS-R Coilover’s and also RS-R rear upper links to correct the camber from lowering. Also added Lexus puddle lights. Considering doing the screen protection..BBK upgrade and swap out to better speakers.
Last edited by Dunerking; 06-17-24 at 05:06 PM.
The following users liked this post:
gamma742 (06-18-24)
06-17-24, 03:43 PM
#41
Great thread!
Nothk g fancy on the wife’s NX450h+..22” Vossen rims and lowered with RS-T Coilover’s and also RS-T rear upper links to correct the camber from lowering. Also added Lexus puddle lights. Considering doing the screen protection..BBK upgrade and swap out to better speakers.
Nothk g fancy on the wife’s NX450h+..22” Vossen rims and lowered with RS-T Coilover’s and also RS-T rear upper links to correct the camber from lowering. Also added Lexus puddle lights. Considering doing the screen protection..BBK upgrade and swap out to better speakers.
Thanks
06-17-24, 05:05 PM
#42
All the RS-R suspension I bought from RHD Japan…and probably have $2,000 with install for those parts. The 22” Vossen rims were about $2600 and the 3M PPF was $1400 but I had the windows tinted as well. The puddle lights were probably $50
The following users liked this post:
gamma742 (06-18-24)
08-26-24, 01:48 PM
#44
But then maybe a week later I find something even better, and BAM there are like 12 LED's in there, maybe more, and that is what I currently have.
The next item that I have got is this TPU film for dash board LCS screen. Just to protect the screen from any unnecessary scratches.
08-26-24, 07:07 PM
#45
Pit Crew
Thread Starter
Screen protector -> https://www.aliexpress.us/item/3256805882771098.html
Trunk light -> https://www.aliexpress.us/item/3256806266083636.html
The following users liked this post:
con5tant (09-02-24)