Auto Stop/Start Disable.....
#1
Advanced
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Does anyone know if a solution to permanently or automatically disable the auto stop/start "feature" on the 350 turbo-four is available yet?
#2
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Mine rarely works. It always says battery charging.
You can always just turn it off, but that not really a solution.
It will not come on if you are light on the brakes at a light. Don't push hard and it doesn't turn the car off.
You can always just turn it off, but that not really a solution.
It will not come on if you are light on the brakes at a light. Don't push hard and it doesn't turn the car off.
#4
Advanced
Thread Starter
#6
Advanced
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I assume that to be true but there are people that make devices that bypass this and turn it off until turned back on. I've seen them for Jeeps that connect to the OBD port and others plug in to the back of the regular switch inside the console. Sadly, it doesn't appear that anyone makes one for our cars. At least not yet.
#7
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
One of the members of the toyotanation forum made a device for two generations of Highlanders that he sells on ebay. I had one on our 2017 Highlander and it worked great (easy install, just pop the button off and add it inline, no wire cuts). It just made the switch work in reverse, so start/stop was disabled by default when the car was started, but if you pressed the button, it would enable it.
Hopefully he might be willing to make one for the NX.
Hopefully he might be willing to make one for the NX.
Trending Topics
#8
Advanced
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
One of the members of the toyotanation forum made a device for two generations of Highlanders that he sells on ebay. I had one on our 2017 Highlander and it worked great (easy install, just pop the button off and add it inline, no wire cuts). It just made the switch work in reverse, so start/stop was disabled by default when the car was started, but if you pressed the button, it would enable it.
Hopefully he might be willing to make one for the NX.
Hopefully he might be willing to make one for the NX.
The following users liked this post:
Randyp1234 (05-03-22)
#11
#12
Advanced
Thread Starter
#13
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I took a look at the center console that needs to be removed in order to get to the Start/Stop button. I'm a little hesitant to try to remove it without a parts diagram or some instruction pics, especially with it on a brand new car that has a possible parts shortage. Without knowing how to safely remove the console cover (let's face it, my wife might kick me out if I break her new car
), I can't get pics to the guy who builds the start/start disable device.
If anyone is a bit more confident in removing the cover, let me know the steps and I might attempt it myself.
![Egads!](https://www.clublexus.com/forums/images/smilies/pat.gif)
If anyone is a bit more confident in removing the cover, let me know the steps and I might attempt it myself.
The following users liked this post:
Randyp1234 (04-06-24)
#14
Intermediate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I was disturbed to learn today that my incoming NX350 turbo will be blemished with the infernal stop/start system. I poked around and found this firm that makes the relatively easy-to-install Autostop Eliminator for other models. This is the response I swiftly received after asking if they could produce one for our vehicles. If anyone is in this area and can assist, we’d all benefit:
“We are currently focused on creating devices for higher-volume vehicles. If we decide to make a device for this vehicle, we would need a test vehicle to use to make the device. New devices depend on the vehicles people bring us.
“If you know of anyone willing to bring a vehicle to Fairmont, WV to use to make the device, please put them in touch with me. We don't need to drive the vehicle and the owner could stay with the vehicle the entire time. It usually takes about 8 hours to put together a prototype and test it.
“Or, some vehicles have come to us because someone posted on forums/Facebook/social media and found someone with the same vehicle closer to us and they brought the vehicle to us. Just throwing that out in case you can find someone in the chat room that can help us and help you get the device sooner by getting someone to bring us a vehicle. Otherwise, I'll let you know if/when a device is made available.
Jessica Lambert
TRL Automotive
jessica@trlauto.com
https://www.autostopeliminator.com
“We are currently focused on creating devices for higher-volume vehicles. If we decide to make a device for this vehicle, we would need a test vehicle to use to make the device. New devices depend on the vehicles people bring us.
“If you know of anyone willing to bring a vehicle to Fairmont, WV to use to make the device, please put them in touch with me. We don't need to drive the vehicle and the owner could stay with the vehicle the entire time. It usually takes about 8 hours to put together a prototype and test it.
“Or, some vehicles have come to us because someone posted on forums/Facebook/social media and found someone with the same vehicle closer to us and they brought the vehicle to us. Just throwing that out in case you can find someone in the chat room that can help us and help you get the device sooner by getting someone to bring us a vehicle. Otherwise, I'll let you know if/when a device is made available.
Jessica Lambert
TRL Automotive
jessica@trlauto.com
https://www.autostopeliminator.com
The following users liked this post:
mcomer (07-02-22)
#15
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
My battery test showed healthy.
Dealer said they had no specific diagnostic tools. Lexus Canada said total to the dealer.
The dealer and Lexus Canada said it is working “as designed” but how would they know if there are no specific diagnostic tools?