2nd Annual Executive/VIP/Others April Meet!
#394
I decided how I wanted it on there. Kept both pieces stuck together. I flipped the plate to view the back. Cut to lenght across the top, making sure that it wasnt going to be visible. I ended up doing 2 strips. One above the other. With just one, the plate flapped around. 2 held it on there pretty firmly. I still havent had any problems, since the XXX burgers meet
while the 2 pieces are still stuck together. Decide where you want the plate to be. Mount it on there, pressing firmly on the plate, to get it stuck onto the bumper. Now you have a secure plate, without drilling holes or having that awful screw/bolt heads showing. Then if you have to, you can take the plate off. And put it back on at anytime.
What I did, was have the cloth part on the bumper. And the velcro part on the plate. It will be better that way.
while the 2 pieces are still stuck together. Decide where you want the plate to be. Mount it on there, pressing firmly on the plate, to get it stuck onto the bumper. Now you have a secure plate, without drilling holes or having that awful screw/bolt heads showing. Then if you have to, you can take the plate off. And put it back on at anytime.
What I did, was have the cloth part on the bumper. And the velcro part on the plate. It will be better that way.
Thread
Thread Starter
Forum
Replies
Last Post