Help!.......guys w/ the GTE swap?
#1
Help!.......guys w/ the GTE swap?
I was ordering some things from PHR today, and I was shocked when they told me that the PHR Rigid motor mounts for the Supra won't fit the Soarer? So could some of you BIG Power guys shed some light on this problem?
Jimmy
Jimmy
#2
i used the mounts that were on the gte
-motor didnt fall out yet
may want to tell jerrad that your using the
gte - not the ge
so long as you leave the gte brackets on the
block - you can swap any "supra" engine mount
you want -trd what ever
the brackets are different which makes the
mounts different heights
#6
Told ya Jimmy, always talk to Jarrett! (his sales people often give out mis-information).
Good luck with the project man!, Anymore help / questions you know im on aol 24/7 well almost, lol
Good luck with the project man!, Anymore help / questions you know im on aol 24/7 well almost, lol
Last edited by TurboB6; 11-12-03 at 11:02 PM.
Trending Topics
#8
I too ordered the phr engine mounts for my jdm GTE. Apparently for some reason my 94 clip had 98 mounts. They were too long, so you need to order stubby 97-98 mounts. Good luck returning the mounts to phr, restocking fees are a *****.
#10
again
the best of my knowledge there are
only one type of gte mounts (height)
order mounts for a '94 turbo supra
& dont tell them what their really for
mine also is a '94 us spec engine
& all is well w/ no problems
-john
the best of my knowledge there are
only one type of gte mounts (height)
order mounts for a '94 turbo supra
& dont tell them what their really for
mine also is a '94 us spec engine
& all is well w/ no problems
-john
Thread
Thread Starter
Forum
Replies
Last Post