95 SC400 - Trans Skips 2nd
#16
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
yes it does! My ecu was rebuilt right before I bought the car by tannin so I didn’t think that was the issue. I originally thought 1-3 worked and od didn’t because of the rev I was at highway speeds and maybe my converter was stalling 2nd but I just found a service manual showing what the rpm’s should be and it got me thinking, then I tested and verified I don’t have second at all. So either the harness somewhere is shorted out the ecu was fixed poorly
#17
Rookie
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
yes it does! My ecu was rebuilt right before I bought the car by tannin so I didn’t think that was the issue. I originally thought 1-3 worked and od didn’t because of the rev I was at highway speeds and maybe my converter was stalling 2nd but I just found a service manual showing what the rpm’s should be and it got me thinking, then I tested and verified I don’t have second at all. So either the harness somewhere is shorted out the ecu was fixed poorly
So I figured my 2nd must be missing.
If I were you, I'd try to find another ECU to test with.
#18
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
mine is a 92 sc400 with the 3.92 rear gears, what rpm are you at around 70mph? I’m at like 26-2700 which is why i thought od wasn’t working because I thought it should be lower, but now I’m figuring out that that’s normal and the gear I didn’t have is 2nd and it makes the car lame to drive because of the such long gears it has lmao
#19
Rookie
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
mine is a 92 sc400 with the 3.92 rear gears, what rpm are you at around 70mph? I’m at like 26-2700 which is why i thought od wasn’t working because I thought it should be lower, but now I’m figuring out that that’s normal and the gear I didn’t have is 2nd and it makes the car lame to drive because of the such long gears it has lmao
Thread
Thread Starter
Forum
Replies
Last Post
zukosc
Performance & Maintenance
2
10-19-21 07:57 AM