Steering tilt motor fix for sc300
05-19-24, 12:04 PM
#1
Driver School Candidate
Thread Starter
Steering tilt motor fix for sc300
My 1998 sc300 steering wheel would tilt a little, then need a rest, before tilting again.
The armiture, magnets, and brushes have no capability to call for a rest.
There is one component that does; the thermistor that is installed inside the motor case.
No need to remove the thermistor, just solder a jumper wire across it, and the resting will disappear.
(Use strings to hold the brushes back during reassembly)
The armiture, magnets, and brushes have no capability to call for a rest.
There is one component that does; the thermistor that is installed inside the motor case.
No need to remove the thermistor, just solder a jumper wire across it, and the resting will disappear.
(Use strings to hold the brushes back during reassembly)
The following users liked this post:
Turbostar (05-20-24)
Thread
Thread Starter
Forum
Replies
Last Post
mikef
SC400 / 300 Classifieds
1
03-31-16 02:25 PM
James1830
Lexus Audio, Video, Security & Electronics
2
08-08-03 10:37 AM