Anyone removed ignitions switch? Or have a FSM??
07-20-04, 06:54 PM
#1
Lead Lap
Thread Starter
Join Date: Jul 2004
Location: Virginia
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Anyone removed ignition switch? Or have a FSM??
Well I determined my tumbler assembly is fubar so I'll be replacing it. Has anyone on here replaced it before or have a FSM (Factory Service Manual) that could send me the part on removing this? Thanks for any help.
-Chris
-Chris
Last edited by JZZ30TT; 07-20-04 at 06:54 PM.
07-20-04, 07:24 PM
#2
you have to insert the key into the ignition, and turn it to the first click (maybe the second), and then you will have to get something pointy and press a spring loaded ball while pulling the cylinder out.
the spring loaded ball is on the bottom of the cylinder.
the spring loaded ball is on the bottom of the cylinder.
Trending Topics
07-23-04, 07:14 PM
#9
Lead Lap
Thread Starter
Join Date: Jul 2004
Location: Virginia
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Well... I borowed a slide hammer from a friend and it worked like a charm! Thanks for all the help. Got my new ignition switch in, in less than 5 min. lol...
03-12-10, 02:19 PM
#10
Driver
iTrader: (9)
Join Date: Apr 2009
Location: CA
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Bumping a 6yr old thread lol. But I have an issue and didn't want to make another thread covering the same issue.
Cliffs:
Stupid transporter lost my key, and I have a key and complete ignition off my 95 shell. I want to swap ignitions to use the key from my 95, on my 93. What exactly do I have to do?
95 ignition and key--------->>>> to my 93 to fire it up
Do the same steps that were mentioned above???
Cliffs:
Stupid transporter lost my key, and I have a key and complete ignition off my 95 shell. I want to swap ignitions to use the key from my 95, on my 93. What exactly do I have to do?
95 ignition and key--------->>>> to my 93 to fire it up
Do the same steps that were mentioned above???
Last edited by IggySupra; 03-12-10 at 02:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
shingey
RX - 2nd Gen (2004-2009)
14
10-18-21 12:06 PM
