computer and TPS questions
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2004
Location: Tennessee
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
computer and TPS questions
On a '95 sc400, where is the computer? I have been told it is under the dash on the passenger side but even after taking off the glove box, etc, I can't locate it. Also, is the computer OBD I or II for this year?
On a seperate issue, does anyone have the ohm and voltage specs (and which terminals on the TPS to connect to) to check out the TPS and the setting if it is is replaced with a new one?
Thanks....
On a seperate issue, does anyone have the ohm and voltage specs (and which terminals on the TPS to connect to) to check out the TPS and the setting if it is is replaced with a new one?
Thanks....
#3
Lead Lap
iTrader: (1)
Join Date: Mar 2001
Location: Illinois
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
nick778,
ECU is under the passneger side floorboard/firewall area. Try this link for location and removal instructions.
95 SC400 is OBDI as 0l33l mentioned.
ECU is under the passneger side floorboard/firewall area. Try this link for location and removal instructions.
95 SC400 is OBDI as 0l33l mentioned.
Last edited by ChrisK; 08-23-04 at 08:22 AM.
#4
Driver School Candidate
Thread Starter
Join Date: Aug 2004
Location: Tennessee
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Many Thanks for that link. I'm trying to pull any stored codes. On e.g., Nissans you can turn a screw and the CEL or computer will flash the codes. Is there such a way to do this with the SC400 computer? If so how. Again, thanks...
Thread
Thread Starter
Forum
Replies
Last Post
Maeve
CL of Southern California
1
08-18-12 07:54 PM