Max hp from 2jzge motor
#17
Lexus Test Driver
Join Date: Apr 2005
Location: South Walton County, FL
Posts: 1,510
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by /Aerostar\
Well lets think about it, you spend $400 now for headers that you'll use for what? 6 months and then will be replaced with an aftermarket exhaust manifold for turbo
#18
Lexus Fanatic
iTrader: (1)
Originally Posted by Salil022
are headers really pointless? i wouldn't mind spending 300 if the gains are reasonable, can a 5spd SC300 do mid to high 14's with exhaust, intake and headers and a good SAFC set up?
best 60ft I could muster was a 2.6 and I ran a 9.8 1/8th mile... if i had better tires and could have trimmed off even 2 tenths of the 60ft, i would have been in the 14s, my car had an intake...
I've seen i/h/e NA supras run 14.2s and 14.3s before... so its very plausible
#19
1UZFE/2JZGTE
iTrader: (11)
Originally Posted by Salil022
are headers really pointless? i wouldn't mind spending 300 if the gains are reasonable, can a 5spd SC300 do mid to high 14's with exhaust, intake and headers and a good SAFC set up?
Last edited by plex; 04-21-05 at 03:19 AM.
#20
Lexus Test Driver
Join Date: Apr 2005
Location: South Walton County, FL
Posts: 1,510
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by cherplex
He said headers are pointless if you are going to get turbo eventually, if you cant figure out why well.... .........
#21
Look the best thing you can do in a N/A SC300 is bfi,exhast,safc2,an .....juice in fact i bet if you got the bfi,exhast,safc2,stage one clutch, drag radials an sprayed a 120 shoot, you could run maybe a 13.9an also the other great thing is that if you decide to go turbo you can still use all of these mods. with a turbo set up also one other thing is dont for get to up garde your fuel pump.
#23
Lexus Test Driver
Join Date: Apr 2005
Location: South Walton County, FL
Posts: 1,510
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by MyScRuNmIa
Look the best thing you can do in a N/A SC300 is bfi,exhast,safc2,an .....juice in fact i bet if you got the bfi,exhast,safc2,stage one clutch, drag radials an sprayed a 120 shoot, you could run maybe a 13.9
#24
Lexus Fanatic
iTrader: (1)
Originally Posted by Salil022
i am definitely going to end up with the bfi, exhaust, safc and n2o set up but what is the best type of exhaust you can get for an SC300, performance wise and of course i dont want it to be too loud lol
MkIV Supra exhausts bolt right up and only need a minor straight extension.... pretty good bang for the buck seeing as how ebay exhausts in 3" size can be picked up for under $400 new with a warranty
dual exhausts are another matter and a lot more expensive...
and you can always get something custom done (in single or dual as well)
#25
Hey guys from all of the mods that i listed befor wouldent it be considered a BPU N/A SC300.
BPU:BPU™? Basic Performance Upgrade™. This term is used on almost every car internet site to describe the awesome bolt-on parts ONLY BPU™ modification!!
BPU:BPU™? Basic Performance Upgrade™. This term is used on almost every car internet site to describe the awesome bolt-on parts ONLY BPU™ modification!!
#26
Lexus Test Driver
Join Date: Apr 2005
Location: South Walton County, FL
Posts: 1,510
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by MyScRuNmIa
Hey guys from all of the mods that i listed befor wouldent it be considered a BPU N/A SC300.
BPU:BPU™? Basic Performance Upgrade™. This term is used on almost every car internet site to describe the awesome bolt-on parts ONLY BPU™ modification!!
BPU:BPU™? Basic Performance Upgrade™. This term is used on almost every car internet site to describe the awesome bolt-on parts ONLY BPU™ modification!!
#29
Lexus Champion
Join Date: Jul 2003
Location: Arizona
Posts: 1,623
Likes: 0
Received 0 Likes
on
0 Posts
I find this thread intersting since Ill eventually be going through a similar route.
I have a slowmatic sc300, and I dont plan on boosting this car for years to come, but at same token I want most of the bolt ons done here to be useful for when that time comes. I eventually hope I can be in the mid 14s with just bolt ons and weight savings (and eventual 5 speed swap) , but I was wondering how much of a power increase could I expect if I were to start with a bfi intake, cam gears and safc2 plus dyno tune?
I have a slowmatic sc300, and I dont plan on boosting this car for years to come, but at same token I want most of the bolt ons done here to be useful for when that time comes. I eventually hope I can be in the mid 14s with just bolt ons and weight savings (and eventual 5 speed swap) , but I was wondering how much of a power increase could I expect if I were to start with a bfi intake, cam gears and safc2 plus dyno tune?
#30
Lexus Test Driver
Join Date: Apr 2005
Location: South Walton County, FL
Posts: 1,510
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by Inabj2
but I was wondering how much of a power increase could I expect if I were to start with a bfi intake, cam gears and safc2 plus dyno tune?