uh turbo time NA-T feed me!
01-15-06, 12:30 PM
#226
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
Since no one (even authorized power house racing dealer) could tune the MAP-ECU in Dallas, I spoke with a supraforums user by the name of "gamimnon" in Austin, Texas. I highly recommend Gamimnon for engine work and tuning work on your car. He is very thorough, knowledgeable, takes pride in his work, and really cares about your car being done properly. He said he could tune the map-ecu on my car while helping me stay in budget. Well guess what folks, he did just that! 
.
The spike(s) you see on the graph are simply dynojet reading errors..the powerband is very smooth. So, on a 5.8psi spring (boosting only 5.5psi), stock sc300 exhaust, TE-44 turbo, and daveH manifold, we achieved 260rwhp
:
"Daniel" was the guy that helped us on the dyno at Colvin Automotive. You can find their contact info at www.colvinautomotive.com .
.The spike(s) you see on the graph are simply dynojet reading errors..the powerband is very smooth. So, on a 5.8psi spring (boosting only 5.5psi), stock sc300 exhaust, TE-44 turbo, and daveH manifold, we achieved 260rwhp
:"Daniel" was the guy that helped us on the dyno at Colvin Automotive. You can find their contact info at www.colvinautomotive.com
.
Last edited by dejacky; 02-13-06 at 02:55 AM.
01-16-06, 06:32 AM
#229
That torque curve is like sex!!!!!! Look how flat it is! 
Congrats on finally having it tuned and a good job goes out to Gamimnon for his abilitites. Now hurry up and get us some vids will ya? 
Congrats on finally having it tuned and a good job goes out to Gamimnon for his abilitites. Now hurry up and get us some vids will ya?
01-16-06, 08:23 PM
#232
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by chitwnsazn
good job! quick question, what is your exhaust set up exactly (how stock is it)?
Chidoks,
that torque spike is a Dynojet reading error as I explained in the first dyno post ;-)
01-16-06, 09:47 PM
#233
Driver
Join Date: Jun 2005
Location: ok!
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
congratuations
Finally its been done! Congratuations!!!
I was impressed how his turbo spool in low rpms and power band is such wide. I felt his car fly like a small car with turbo. It start kicking from 2300rpms if I was not wrong, before it fully tuned...it must be awesome now! 
cant imagin how his car runs after he has a LSD on..I look forward to watching some video's as well. 
I was impressed how his turbo spool in low rpms and power band is such wide. I felt his car fly like a small car with turbo. It start kicking from 2300rpms if I was not wrong, before it fully tuned...it must be awesome now!
cant imagin how his car runs after he has a LSD on..I look forward to watching some video's as well.
01-17-06, 10:02 AM
#234
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kaukau
Finally its been done! Congratuations!!!
I was impressed how his turbo spool in low rpms and power band is such wide. I felt his car fly like a small car with turbo. It start kicking from 2300rpms if I was not wrong, before it fully tuned...it must be awesome now! cant imagin how his car runs after he has a LSD on..I look forward to watching some video's as well.
I was impressed how his turbo spool in low rpms and power band is such wide. I felt his car fly like a small car with turbo. It start kicking from 2300rpms if I was not wrong, before it fully tuned...it must be awesome now!
cant imagin how his car runs after he has a LSD on..I look forward to watching some video's as well. 
UPDATE:
Daniel found my sony memory stick and kept it for me
. Expect Dyno video in a few days 
Last edited by dejacky; 01-17-06 at 12:36 PM.
01-17-06, 03:56 PM
#235
Driver
Join Date: Jun 2005
Location: ok!
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
cant wait...
I cant wait to see the dyno video...
May I know where did you dyno at? I most probably need to go down somewhere in Dallas to do a dyno in the future....cannot find any good dyno place in state, yet...sigh
May I know where did you dyno at? I most probably need to go down somewhere in Dallas to do a dyno in the future....cannot find any good dyno place in state, yet...sigh
01-22-06, 01:31 PM
#236
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kaukau
I cant wait to see the dyno video...
May I know where did you dyno at? I most probably need to go down somewhere in Dallas to do a dyno in the future....cannot find any good dyno place in state, yet...sigh
May I know where did you dyno at? I most probably need to go down somewhere in Dallas to do a dyno in the future....cannot find any good dyno place in state, yet...sigh
http://www.colvinautomotive.com/ but the car was tuned by GAMIMNON from supraforums.com. We just used their Dyno facility and "Daniel" helped with the dyno service.
DYNO VIDEO:
http://media.putfile.com/MOV0281046
Last edited by dejacky; 01-24-06 at 06:24 PM.
02-02-06, 01:57 PM
#237
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
Time for more power. I just ordered an Innovate LC-1 wideband to use with my map-ecu. With 1.5psi more boost and some map-ecu datalogging tuning sessions, I'm hoping to achieve 300rwhp on 93 octane premium unleaded pump gas 
.
.
02-07-06, 08:11 PM
#238
Lead Lap
iTrader: (4)
Join Date: Dec 2005
Location: CA
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dejacky
http://www.colvinautomotive.com/ but the car was tuned by GAMIMNON from supraforums.com. We just used their Dyno facility and "Daniel" helped with the dyno service.
DYNO VIDEO:
http://media.putfile.com/MOV0281046
DYNO VIDEO:
http://media.putfile.com/MOV0281046
Good luck on hitting the 300rwhp mark- I'm sure it's within your reach with a bit more fine tuning
-Allen
02-09-06, 07:07 PM
#239
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Blk97SC300
video doesn't connect for me... anyone else running into this problem?
Good luck on hitting the 300rwhp mark- I'm sure it's within your reach with a bit more fine tuning
-Allen
Good luck on hitting the 300rwhp mark- I'm sure it's within your reach with a bit more fine tuning
-Allen
02-09-06, 07:11 PM
#240
Lexus Test Driver
iTrader: (7)
Join Date: Dec 2004
Location: Classified
Posts: 1,469
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dejacky
Time for more power. I just ordered an Innovate LC-1 wideband to use with my map-ecu. With 1.5psi more boost and some map-ecu datalogging tuning sessions, I'm hoping to achieve 300rwhp on 93 octane premium unleaded pump gas .
.