uh turbo time NA-T feed me!
#31
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
I guess it was used and not cleaned?
Last edited by dejacky; 08-07-05 at 12:57 PM.
#32
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
Well, I don't think that my manifold needs sandblasting.
#39
Lexus Test Driver
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Location: Behind you
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
received SMIC piping kit today and waiting on the auto tt LSD. So I have the following to do to complete my project:
1. Find a cheap turbo blanket for a .63 A/R Garrett Exhaust Turbine housing? (HELP? )
2. Install the Supra Auto Limited Slip Differential unit (just the unit..I'm using same gear ratio)
3. Remove EGR system
4. Perform Coolant ByPass Mod
5. Install TT fuel pump
6. Take it to a shop that will drill oil pan for me (remove & clean it by lowering crossmember)
7. Install RX7 550cc injectors
8. Install SMIC
9. Install Turbo System
10. Drive back to shop and have them properly weld my exhaust and downpipe
1. Find a cheap turbo blanket for a .63 A/R Garrett Exhaust Turbine housing? (HELP? )
2. Install the Supra Auto Limited Slip Differential unit (just the unit..I'm using same gear ratio)
3. Remove EGR system
4. Perform Coolant ByPass Mod
5. Install TT fuel pump
6. Take it to a shop that will drill oil pan for me (remove & clean it by lowering crossmember)
7. Install RX7 550cc injectors
8. Install SMIC
9. Install Turbo System
10. Drive back to shop and have them properly weld my exhaust and downpipe
#41
s5 t2 injectors i've seen go from around 100 for 4 to 40 for 4.
The price really varies. Just troll rx7club or nopistons for injectors and you'll find something eventually.
I'm gonna be doing a similar setup to this too.
The price really varies. Just troll rx7club or nopistons for injectors and you'll find something eventually.
I'm gonna be doing a similar setup to this too.