chino is teh man
#1
Lexus Champion
Thread Starter
Join Date: May 2005
Location: Central FL
Posts: 1,973
Likes: 0
Received 0 Likes
on
0 Posts
chino is teh man
As many of you read, when you swap a 1JZ into an SC, the tach doesnt work. Well alot of ppl go the MSD route, well i had chino do his magic on my car, no msd pickup, no nothing. By the time it took me to goto the bank to give him a few bucks for doing it, tach worked. Never had to touch the engine bay. Good work!
#2
sweet! chino do you think you could post up a how - to for the rest of us? im waiting till late spring to do mine but id like to have all the info for stuff like this in hand and memorized so i dont have any problems. thanks.
marshall
marshall
#3
Lexus Champion
Thread Starter
Join Date: May 2005
Location: Central FL
Posts: 1,973
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vipsoarer
sweet! chino do you think you could post up a how - to for the rest of us? im waiting till late spring to do mine but id like to have all the info for stuff like this in hand and memorized so i dont have any problems. thanks.
marshall
marshall
#7
Originally Posted by DETUNED
Yeah, those MSD tach adapters suck ***. I didn't use one on my car either and wired it straight up.
I will paypal you 50cent along with each member who needs to know this
Trending Topics
#8
Mine is wired straight up to. I got it done at www.grip-industries.com, couldnt tell you how they did it.
#9
Lexus Test Driver
Join Date: Apr 2005
Location: South Walton County, FL
Posts: 1,510
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by bmsport
Mine is wired straight up to. I got it done at www.grip-industries.com, couldnt tell you how they did it.
#11
Lexus Champion
Thread Starter
Join Date: May 2005
Location: Central FL
Posts: 1,973
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by got_trd
i would of done ur temp gauge right then and there 2 but you didnt want me to..... no resistor needed for that either
u owe me 10 bux, next time we meet up ill take the cluster out and u can do it, and we call it even
#13
Lead Lap
iTrader: (1)
Join Date: Jan 2003
Location: California
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Im intrested in how to wire the tach and temp guage without resistors or the msd unit. My temp gauge doesn't work rite now and the msd unit is what im at the moment for the tach. Help a fellow sc300 brotha out . I promise i'll keep it a secret .
~Kevin
~Kevin