SEARCHED, short shifter help
#1
Racer
Thread Starter
SEARCHED, short shifter help
im looking for a short shifter for my 95. i read that a TRD short shifter works... where can i find one. and does it fit w/o problems?
#2
Lexus Test Driver
Join Date: Nov 2003
Location: California
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
TRD should work. I believe it was 95 that they switched the SCs to the newer style tranny. What you could do to find out is take off the trim plate and look at where the shifter bolts to the transmission abnd what kind of shifter it is. If it is the kind where a bolt goes through the bottom then the TRD will work. if it is a ball/socket type shifter then the TRD will not work.
#4
Lexus Test Driver
Join Date: Nov 2003
Location: California
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Lexus Champion
the C's shifter is the only on that i know of. unless you have the r154 tranny from the soarer, in which case the trd would work. there used to be on on ebay for like $60, but they were garbage... i snapped on in half shifting into second... and it wasnt that hard of a shift. its not easy to find ont that works for cheap, because there isnt one. we only have one option.
#11
Lexus Champion
Originally Posted by VJ RC51
metal cutting saw blade and or die grinder
#12
Lexus Champion
Join Date: May 2005
Location: Central FL
Posts: 1,973
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ki_soarer
its not that easy with the shape of the shifter, and besides that, a shorter shaft does not make it a short shifter because the throw would remain the same.
#13
Lead Lap
iTrader: (2)
Originally Posted by ki_soarer
its not that easy with the shape of the shifter, and besides that, a shorter shaft does not make it a short shifter because the throw would remain the same.
#14
#15
Racer
Thread Starter
i dont care about shorter shaft. mine is perfect height. i can care less about shorter throws. the thing is i got a shift **** that wont fit because the shaft gets thicker about 1/3 way down. and i want a shifter that is the same size as the threaded part. i only know of 2 shifters, C's and TRD. and TRD is what i want. i just want to spend 300 for it