Greddy boost cut controller?
03-08-06, 04:13 PM
#1
Lead Lap
Thread Starter
Join Date: Nov 2003
Location: Arkansas
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Greddy boost cut controller?
I just got in my bcc, they sent me one for a mr2 (sw20) 
. Will this still work or do I need to get the jza80? It has one black, white, red, green wire. Also advice on how to wire it up would be appreciated.
Thanks
. Will this still work or do I need to get the jza80? It has one black, white, red, green wire. Also advice on how to wire it up would be appreciated.Thanks
03-09-06, 12:04 AM
#2
Lexus Champion
i got the same one bro, no worries. greddy bcc never made one for supra, i think....and obviously not for lexus. the set up is for mr2 so you might wanna open up the bcc and you will find a small adjustment screw . turn the screw fully clockwise and start turning it counter-clockwise for adjustment.
go to mkiv.com for proper hook up on the wiring or go to greddy.com
hope that helps.
go to mkiv.com for proper hook up on the wiring or go to greddy.com
hope that helps.
03-09-06, 08:51 PM
#5
Lead Lap
Thread Starter
Join Date: Nov 2003
Location: Arkansas
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I just read the mki4 article. Very helpful
http://www.mkiv.com/techarticles/bcc...GReddy_BCC.htm
http://www.mkiv.com/techarticles/bcc...GReddy_BCC.htm
Thread
Thread Starter
Forum
Replies
Last Post
