update on my 1jz....
#1
Pole Position
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: Illinois
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
update on my 1jz....
Well here are some pics i took of this last weekends progress.....Only thing now is my stupid mounting situation....... idiot brackets.......My t70 setup ....50mm hks wastegate......
#6
Pole Position
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: Illinois
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
no its not its an ebay kit mp t70 with custom wheel...and custom mani wit custom 3inch dp..
only the 50mm hks wastegate was purchased on ebay
only the 50mm hks wastegate was purchased on ebay
Last edited by lpolo69; 03-28-06 at 10:42 PM.
Trending Topics
#8
Lexus Test Driver
iTrader: (3)
Originally Posted by lpolo69
no its not its an ebay kit mp t70 with custom wheel...and custom mani wit custom 3inch dp..
only the 50mm hks wastegate was purchased on ebay
only the 50mm hks wastegate was purchased on ebay
if it was a custom manifold, wouldnt you have used a t3 flange when it was made instead of the t4 then welded a t3 to it
#10
Pole Position
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: Illinois
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
sure ill take a pic of the turbo this weekend ill also take pics of the new compressor wheel...gosh...................and its a 2jz manfold...when i meant custom i meant i had to weld the t3 flange onto it and cut the wastegate and reweld alot of things....Also port spacing on the 2jz manoi to make it work on the 1jz head..
#11
Lexus Champion
Join Date: May 2005
Location: Central FL
Posts: 1,973
Likes: 0
Received 0 Likes
on
0 Posts
you've been called out. I dont see much hp with at setup at all. Nothing more then what stock twins can do. That turbo looks ebay special. I seen a setup like that on a 1JZ mk3, made 275rwhp on 18psi.
GT35 or GT40 are the ticket, or anything very similar from SP, Precision, etc..
GT35 or GT40 are the ticket, or anything very similar from SP, Precision, etc..
#13
Pole Position
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: Illinois
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
i dont have to proove anything to no one the numbers will show it once its done.. ONly thing is i might need a lil shot to get that turbo to spool up......................or swap the 3.0 block later for the additional .5 of displacement..
#15
Lexus Test Driver
iTrader: (3)
Originally Posted by VJ RC51
you've been called out. I dont see much hp with at setup at all. Nothing more then what stock twins can do. That turbo looks ebay special. I seen a setup like that on a 1JZ mk3, made 275rwhp on 18psi.
GT35 or GT40 are the ticket, or anything very similar from SP, Precision, etc..
GT35 or GT40 are the ticket, or anything very similar from SP, Precision, etc..
The turbine housing on that set up looks like 1.0 or .83 . You can eat a sandwich while you wait for boost