Finally making some headway...
04-06-06, 08:00 PM
#1
Driver
Thread Starter
Join Date: Feb 2006
Location: Fl
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Finally making some headway...
car should be running in a couple weeks, stock bottom end, AEM, BL manifold, ITS turbo, ported head, VW manifold , etc.... just had to share a pic.
http://www.coastaldyno.net/Gallery/d...lbum=11&pos=43
http://www.coastaldyno.net/Gallery/d...lbum=11&pos=43
Last edited by Coastal; 04-06-06 at 08:41 PM.
04-08-06, 08:38 PM
#7
Driver
Thread Starter
Join Date: Feb 2006
Location: Fl
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
havent mounted the VW manifold yet, will be doing that this week, the turbo is a 70 +++ 
, ill get alout more pics as we build the downpipe, exhaust, intercooler and charge piping. i only had the header and turbo on the car to figure out how to set up the wastegate flange, changing the HKS flange over to a Tial unit, then sending the header and turbine housing out to get ceramic. there are a bunch of pics in the gallery of the 6speed rebuild and other stuff. i need to add pictures of the fuel system build, we did some really sick stuff with that part. 
, ill get alout more pics as we build the downpipe, exhaust, intercooler and charge piping. i only had the header and turbo on the car to figure out how to set up the wastegate flange, changing the HKS flange over to a Tial unit, then sending the header and turbine housing out to get ceramic. there are a bunch of pics in the gallery of the 6speed rebuild and other stuff. i need to add pictures of the fuel system build, we did some really sick stuff with that part.
Thread
Thread Starter
Forum
Replies
Last Post
Ebanks
SC- 1st Gen (1992-2000)
9
03-05-01 04:38 AM