torque specs ?
#2
The twin-turbo 1JZ-GTE. Although rated at Japan's self-imposed maximum rating of 280 hp (206 kW), this was probably quite conservative. A later unit (with VVT-i and a single turbo) probably produced well more than 300 hp (221 kW). Torque was rated at 278 ft·lbf (376 N·m) at 2400 rpm.
http://en.wikipedia.org/wiki/Toyota_JZ_engine
Toyota Soarer GT JZZ30 91-01 FR 1600 1JZ-GTE 2491, 6 twin turbo 280hp/6200 39 (378nm)/2400
http://www.japanesesportcars.com/engines/
378= 278.76lb/ft
376= 277.29lb/ft
I'm a little suprised at how low the tq comes on. Makes the 1jz even better imho.
http://en.wikipedia.org/wiki/Toyota_JZ_engine
Toyota Soarer GT JZZ30 91-01 FR 1600 1JZ-GTE 2491, 6 twin turbo 280hp/6200 39 (378nm)/2400
http://www.japanesesportcars.com/engines/
378= 278.76lb/ft
376= 277.29lb/ft
I'm a little suprised at how low the tq comes on. Makes the 1jz even better imho.
#3
oh no im not looking for the torque spec on the performance of the motor. im looking for torque specs for torqueing down the bolts. like torqueing down the bolts that holds the cams, torque spec for intake and exhaust manifold.....etc.
#6
I was looking over it the 2jzge and 2jzgte have diofferent torques fro some parts.
I tried to link to it but apperantly i cant link outside.
I'll have to go in tommorow, take screenshots and then upload them 1 by 1 into imageshack. May take awhile.
I tried to link to it but apperantly i cant link outside.
I'll have to go in tommorow, take screenshots and then upload them 1 by 1 into imageshack. May take awhile.
Trending Topics
#8
yes i have all the necessary torque wrenches ranging from 50 ft.lbs to 300 ft.lbs and 10 in.lbs to 100in.lbs specifically camshaft bolts that hold down the cams, cam gear bolts, crankpully, etc.
#9
here it is in .doc format
2jzge SC300
http://www.filefactory.com/650e6c
2jzgte Supra
http://www.filefactory.com/?f5556e
2jzge SC300
http://www.filefactory.com/650e6c
2jzgte Supra
http://www.filefactory.com/?f5556e
Thread
Thread Starter
Forum
Replies
Last Post