Since there are practially no full catback exhaust for the SC300, what mufflers do you use to create your own catback system? Please provide pics/links or any other useful information if possible. For example would these mufflers give me the deep tone and maybe a little more noise if I installed these on my SC300 with custom piping of course.

http://cgi.ebay.com/ebaymotors/02-06...spagenameZWD1V






thanks for your help!!

 

no, do a search.

There are a a few good picks for the catback exhaust out there for our cars (JIC twin spartan, Phoenix Power)

 

i was gonna get those... but i ended up getting the same brand ones but sp2 style...

the tip is bigger and i needed big *** tips to make it look right with the back bumper i have

 

^^ That loosk pretty clean. I been also looking at some Magnaflow mufflers

How much is it roughly costing you guys to have a custom pipe welded to the muffler you bring in?

 

they did mine for 80/both so i guess 40 each... but i just got it welded on... no custom piping... right now i really dont care for performance gains bc they wont be much... once i get my swap done ill ditch both of these and do a single 4 or 5 inch all the way back

 

cost me 150 for custom piping from header back.

 

https://www.clublexus.com/forums/sho...d.php?t=246883


see second page for more pics...theres videos too
2 1/2 piping from cat back and those mufflers
I used to have magna flow but i didnt like the sound..these sound deep and mean

 

If I were starting an exhaust thread, where would I start it.......

 

So going for a full catback vs just welding on the muffler has minimal performance gains that the butt-dyno will feel nothing?

 

The JIC sounds really good.

Mid/low noise at idle and a deep tone when accelerating. Fitment was really good with the stock stuff. I had to move them further out to match up with the widebody though.



It's an angle cut on the tips, but i'm sure a muffler shop can weld on w/e tip you want.

 

go full cat-back

 

I have custom 3" piping from turbos to JP style mufflers got them from Rob aka {-.-} HoeBag and indypwr are running the same mufflers. Mine are very very loud lol. I love the look but the noise is pretty bad luckily the SC isn't my daily.

 

what wing is on that black sc300?>?

heres mine... jsut 4" magnaflow tips on straight 3 inch pipe through a single chamber muffler and through a turbo

 

Go single Heres my custom cat back single exit with a Top Speed muffler. Its loud but it sounds good!

 

I am running both cats with out the resonaters to twin flowmaster mufflers with some stainless tips. Its not to loud but it turns heads when i drive around campus. It s smoother tone so i really like it. I have no idea about the performance gains. There arnt many places around me to do a dyno.