Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

engine shaking HELP

Thread Tools
 
Search this Thread
 
Old 04-10-07, 02:12 PM
  #1  
9teens
Banned SCAMMER
Thread Starter
 
9teens's Avatar
 
Join Date: Mar 2007
Location: 818_SOCAL
Posts: 132
Likes: 0
Received 1 Like on 1 Post
Default engine shaking HELP

sup guys

jus got my car lowered and i was so happy until my engine started shaking. it started hesitating and shaking. i did a search and it does seem like a cylinder isnt firing but im a noob so idk. its lost power and shakes pretty bad. anyone have a clue in whats going on? i just lowered it, drove it to a friends house and did a roll on the fenders. btw i found a diy on youtube. it took me 5 secs with a baseball bat.http://www.youtube.com/watch?v=DDTK9IjKIYU. the car is really sluggish. if anyone can it would be much appreciated.
thanks in advance
Old 04-11-07, 12:04 AM
  #2  
aaronjz
Driver
 
aaronjz's Avatar
 
Join Date: Aug 2006
Location: ca
Posts: 185
Likes: 0
Received 1 Like on 1 Post
Default

um my car is doing the same thing . ive read from some forums that it might be the mounts . so i replaced my tranny mount and the engine mounts are coming
Old 04-11-07, 04:48 AM
  #3  
c2ispy
Pole Position
 
c2ispy's Avatar
 
Join Date: Oct 2006
Location: HI
Posts: 251
Likes: 0
Received 0 Likes on 0 Posts
Default

Sounds like you need to check your caps/rotors/distributors. Both of mines crapped out and I had the same symtoms: sluggish feel, shakey engine, etc. Dont drive it for too long because fuel will build up in your cats and they will start to glow super red and thats not good. :]
Old 04-11-07, 09:24 AM
  #4  
booja
Lead Lap
iTrader: (1)
 
booja's Avatar
 
Join Date: Jun 2006
Location: texas
Posts: 677
Likes: 0
Received 1 Like on 1 Post
Default

i have a missing issue also...

it just started a couple weeks ago... only on a cold start. sounds like its running on 4 cylinders and would not even stay on most of the time. but then after a couple cranks and turning on and off it suddenly just goes back to normal then idle smooth like a lex should. i dont know whats wrong with mine. it does it randomly

ive done the cap rotor plugs and wires...
Old 04-11-07, 10:31 AM
  #5  
SimplyZBes
Masterhater
iTrader: (1)
 
SimplyZBes's Avatar
 
Join Date: Sep 2005
Location: New York
Posts: 505
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up SimplyZBes aka The Master Hater

There are a few possibilities as to why this is happening.
1. You could have a dead or dying coil.
2. It could be a bad plug or bad plug wire.
3. Also, you could have one or more bad fuel injectors
4. Also, faulty air flow meter can do that as well.
5. Did you get any components under the hood wet?
6. Check out your igniter as well.
7. IAC Valve

This is all I can think of right now for you to check on. If I can think of any more things, I will amend this post. Hope this helps.

Last edited by SimplyZBes; 04-11-07 at 10:32 AM. Reason: Additional Info
Old 04-11-07, 10:40 AM
  #6  
9teens
Banned SCAMMER
Thread Starter
 
9teens's Avatar
 
Join Date: Mar 2007
Location: 818_SOCAL
Posts: 132
Likes: 0
Received 1 Like on 1 Post
Default

i did have my engine washed a week ago. wonder if that drove it over the edge. but it was fine untill 4 days later. well its in the shop rite now. im getting a full tune up and fuel sytstem cleaning
Old 04-11-07, 11:51 AM
  #7  
9teens
Banned SCAMMER
Thread Starter
 
9teens's Avatar
 
Join Date: Mar 2007
Location: 818_SOCAL
Posts: 132
Likes: 0
Received 1 Like on 1 Post
Default

Problem fixed. guess i jus needed a tune-up.. ok now on to my next problem...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
98GS430
GS - 2nd Gen (1998-2005)
10
10-09-22 06:04 PM
tomf
ES - 1st to 4th Gen (1990-2006)
8
08-07-11 11:00 AM
1sxyrxy
Performance & Maintenance
4
08-07-06 04:07 AM
Lexozz
Maintenance
2
11-20-02 05:42 PM
Lexozz
LS - 1st and 2nd Gen (1990-2000)
3
10-17-02 02:14 PM



Quick Reply: engine shaking HELP



All times are GMT -7. The time now is 01:29 PM.