1JZ - Cannot Rev Pass 3000 RPMS - Need Guru.
#34
Lexus Champion
Join Date: Apr 2006
Location: South Florida
Posts: 2,872
Likes: 0
Received 0 Likes
on
0 Posts
#35
Racer
iTrader: (1)
so i wired the CEL and it lights up when i put the key to the "on" position but once the car is running, there is no CEL light, so now what do i do? I havent really got any idea of what to check next to get the car running. All the ECU wires are plugged in and i opened the ECU up and the computer board that is on top looks fine. What should i check next guys?
#38
Former Sponsor - Cancelled
Join Date: Jul 2006
Location: GA
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Now that the CEL is working, the next step is to run the codes, as shlounek said. Here is a link showing how to do it (in a Celica, it's the same deal).
Let us know what comes back!
http://www.celicatech.com/imagearchi...ac/FI/FI21.htm
-Doc
Let us know what comes back!
http://www.celicatech.com/imagearchi...ac/FI/FI21.htm
-Doc
#39
Racer
iTrader: (1)
so i was checking the ECU wires today and i noticed that there was a pink wire on one of the ECU plugs that was T-tapped with a purple wire that ran about an inch and a half and was cut after that, i have no idea if this has anything to do with anything but i wanted to check with you guys first.