bucking in my car stopped!! yay!!
#1
bucking in my car stopped!! yay!!
i had a thread here sometime earlier... about my engine bucking... now its stopped... it was my throttle position sensor... i had it re-adjusted... not my car runs perfect...
#4
that's exactly what mines doin right now for the past couple of months and it's getting really annoying...
#6
my car was bucking letting off the gas.. and pressing the gas... letting off the gas.. it would buck.. stepping on the gas a little it would buck.. but.. wot it doesnt buck.. stepping on it a little will seem like it has no power for about half a second.. then.. all a sudden it jerks and bucks and has power.. its been a while.. i dont really remember exactly what it did.. but.. i hope it helps.. and the tps was easily adjusted.. remover the plastic valve cover.. then loosen the screw on the tps... enough to move it only.. then turn it counter clock wise.. til it can move anymore.. then.. tighten the screw.. hope this helps..
Trending Topics
#8
my car was bucking letting off the gas.. and pressing the gas... letting off the gas.. it would buck.. stepping on the gas a little it would buck.. but.. wot it doesnt buck.. stepping on it a little will seem like it has no power for about half a second.. then.. all a sudden it jerks and bucks and has power.. its been a while.. i dont really remember exactly what it did.. but.. i hope it helps.. and the tps was easily adjusted.. remover the plastic valve cover.. then loosen the screw on the tps... enough to move it only.. then turn it counter clock wise.. til it can move anymore.. then.. tighten the screw.. hope this helps..
#12
+1 fixed my bucking issue, haha vote this for sticky
to add a little more info, turning the TPS CCW reduces the voltage, mine was set at .60v with throttle closed, twisted it back to .40v and problem disappeared.
to add a little more info, turning the TPS CCW reduces the voltage, mine was set at .60v with throttle closed, twisted it back to .40v and problem disappeared.
#14