Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Rear trailing arm bushings

Thread Tools
 
Search this Thread
 
Old 11-13-07, 12:28 PM
  #1  
Ezcompany
Driver School Candidate
Thread Starter
 
Ezcompany's Avatar
 
Join Date: Nov 2005
Location: FL
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default Rear trailing arm bushings

Please help! I have searched the forum extensively for someplace to buy relacement bushings for the rear trailing arms with no luck! I have excessive wear to the right rear tire even though the alignment is well within specs. The bushings would be for a 95 SC300. Appreciate all help.
Old 11-13-07, 03:33 PM
  #2  
TT6SPDSC
Pole Position
 
TT6SPDSC's Avatar
 
Join Date: Aug 2006
Location: Illinois
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
Default

www.tmengineering.net has bushing kits for the SC.

I'm wondering if you mean the lateral arm bushing though, the arm that runs front to back, not side to side. If that's the one you're speaking of and you need the bushing that's pressed into the knuckle you're probably out of luck. I'm not even sure if that busing can be bought from Toyota...You may have to replace the whole knuckle to get it.

Ok, Toyota is calling that arm a rear strut rod. The front bushing that presses into it is available from Toyota, the one in the knuckle is not.
Old 11-13-07, 03:48 PM
  #3  
O. L. T.
Keeper of the light
iTrader: (17)
 
O. L. T.'s Avatar
 
Join Date: Feb 2003
Location: My little world
Posts: 34,106
Received 360 Likes on 230 Posts
Default

Maybe you didn't search in the correct forum

Moved.
Old 11-14-07, 11:05 AM
  #4  
miraluna
Pole Position
iTrader: (2)
 
miraluna's Avatar
 
Join Date: Nov 2006
Location: CA
Posts: 296
Received 2 Likes on 2 Posts
Default

ebay... there was couple ebayer who sells them for like 100+/-
Old 11-15-07, 09:20 AM
  #5  
Ezcompany
Driver School Candidate
Thread Starter
 
Ezcompany's Avatar
 
Join Date: Nov 2005
Location: FL
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default Thank you

Thanks for the replies. Yes my workshop manual has them as being strut rods, however most people refer to them as trailing arms. Thanks again for all your help.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SCFactory
Performance & Maintenance
2
02-12-17 01:28 PM
StevieA
LS - 1st and 2nd Gen (1990-2000)
3
12-05-12 04:46 PM
Rey
LS - 1st and 2nd Gen (1990-2000)
11
10-06-11 07:57 PM
stockhatch
Suspension and Brakes
14
12-17-10 01:40 PM
en11871
LS - 1st and 2nd Gen (1990-2000)
3
11-21-10 08:14 PM



Quick Reply: Rear trailing arm bushings



All times are GMT -7. The time now is 07:30 AM.