Luxor

iTrader: (15)

You know you can buy a $10.00 LED flasher that swaps out with the OEM one and gets rid of the hyper blink.

super400

not on the 92-94s. It's a totally different flasher.

mrmj2u

iTrader: (2)

Tried, but it doesn't fit. These flasher relays have 5 pins.

I plugged my $10 3 pin relay in and tried to use the flashers and nothing lol.

Deathbarel

what does it mean when they say wire in the 4 mf capacitor with the stock 3 one? as in 2 cap's in one hole

aletz12485

iTrader: (1)

I used a 3-prong led flasher in the 5-pin slot and it worked.....just for the drivers side blinker. Worked great at the correct speed. Just didnt work on the passenger side. Probably because its only a 3 -pin. (ordered a 3-pin thinking it was a 5 on Amazon for some dumb reason)

I shaved the rod down as shown in the first post and it slowed the blink rate.

Deathbarel

where is that slot for a standard flasher relay i thought it was controlled by the box where you swap capaciters

aletz12485

iTrader: (1)

i installed it in the same slot as the factory one (drivers side kick panel)

Deathbarel

i see it now. its so much bigger than modern ones thats what threw me. thank you very much, i like your solution.

aletz12485

iTrader: (1)

my solution doesnt work. It was a 3-prong and the factory lexus is a 5-prong. There is no 5-prong LED relay available for our cars from 92-94. Only solution is to do whats done in the first post or to do some solder work to mimic the stock flasher speed.

Deathbarel

amazon sells led flasher relays in 5 pin

mrmj2u

iTrader: (2)

have you tried one? Do the pins line up?

Deathbarel

have not tried it, the pins line up

mrmj2u

iTrader: (2)

very cool! I looked but couldn't find one. Modified my original and it works perfectly

aletz12485

iTrader: (1)

post up the link to the one on Amazon

Deathbarel