Power steering line fix..oh so pretty
#35
Lexus Test Driver
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
so i went out and disconnected the powersteering module,and my steering wheel got very tight(highway mode), so does this mod allways keeps it on city mode or highway mode?
Or does it not effect these presets when driving? thats the only question that keeps me from doing this mod.
Or does it not effect these presets when driving? thats the only question that keeps me from doing this mod.
#36
Lexus Champion
iTrader: (12)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
so i went out and disconnected the powersteering module,and my steering wheel got very tight(highway mode), so does this mod allways keeps it on city mode or highway mode?
Or does it not effect these presets when driving? thats the only question that keeps me from doing this mod.
Or does it not effect these presets when driving? thats the only question that keeps me from doing this mod.
#40
#41
Lexus Test Driver
iTrader: (3)
Join Date: Jan 2009
Location: fl
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
went ahead and did this since my oem line was leaking as well. Now it is still leaking. Same problem with the earls fitting bottoming out. I got lucky on the top with two new 5/8(i think) washers stacked, but the bottom still leaks a little bit. Quite annoying considering the leak is more now with the new setup, lol.
Any ideas for the bottom fitting? Its leaking between the double oring and the rack itself. I'm using the earls metric to an as posted in this thread.
Any ideas for the bottom fitting? Its leaking between the double oring and the rack itself. I'm using the earls metric to an as posted in this thread.
#42
Pole Position
iTrader: (2)
Join Date: Jul 2009
Location: Kill devil hills, NC aka OBX
Posts: 320
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
went ahead and did this since my oem line was leaking as well. Now it is still leaking. Same problem with the earls fitting bottoming out. I got lucky on the top with two new 5/8(i think) washers stacked, but the bottom still leaks a little bit. Quite annoying considering the leak is more now with the new setup, lol.
Any ideas for the bottom fitting? Its leaking between the double oring and the rack itself. I'm using the earls metric to an as posted in this thread.
Any ideas for the bottom fitting? Its leaking between the double oring and the rack itself. I'm using the earls metric to an as posted in this thread.
Have u tryed just one washer perside ?? Seems like when u put on an oil filter and the old seal is still one their. Oil goes everwhere.