Wiring diagram to install gated shifter into pre-98 SC
#1
Wiring diagram to install gated shifter into pre-98 SC
These are the diagrams to install 98+ gated shifter. Spent 2 days to figure these out.
*** This wiring is for SC400 gated shifter, SC300 gated shifter might be different, I don't know since I never had a SC300 gated shifter assembly***
*** I might be able to do a SC300 gated shifter DYI if someone is able to send me an SC300 gated shifter assembly.***
Non gated shift lock harness into 98+ gated shifter harness:
GATEDSHIFTERHARNESSrevised.jpg?t=1209666479
Wiring for gated shifter lamp:
ODandlampharness2.jpg?t=1206747690
Pre-98 ECT into 98+ ECT switch:
ECTHARNESS2.jpg?t=1206744690
Overdrive (O/D) button wiring:
overdriveharness.jpg?t=1206751066
The O/D will disengage if you shift it into " 4 "
inter2.jpg?t=1209667031
*** This wiring is for SC400 gated shifter, SC300 gated shifter might be different, I don't know since I never had a SC300 gated shifter assembly***
*** I might be able to do a SC300 gated shifter DYI if someone is able to send me an SC300 gated shifter assembly.***
Non gated shift lock harness into 98+ gated shifter harness:
GATEDSHIFTERHARNESSrevised.jpg?t=1209666479
Wiring for gated shifter lamp:
ODandlampharness2.jpg?t=1206747690
Pre-98 ECT into 98+ ECT switch:
ECTHARNESS2.jpg?t=1206744690
Overdrive (O/D) button wiring:
overdriveharness.jpg?t=1206751066
The O/D will disengage if you shift it into " 4 "
inter2.jpg?t=1209667031
Last edited by JesLet; 05-01-08 at 11:38 AM.
#2
This is gadgetsc's diagram... I revised it.
Thanks for the help gadgetsc!
NewShifter-1.jpg?t=1209666438
Thanks for the help gadgetsc!
NewShifter-1.jpg?t=1209666438
Last edited by JesLet; 05-01-08 at 11:31 AM.
#6
Trending Topics
#8
Yes!!! I finally got it working!
P
R
N
4-D ........shift to "4" and I have O/D !!!
3
2-L
This mod is for my SC400 it should also work for SC300.
As for my SC400 stock shift linkage, I shortened it by 1 inch. Yes I cut it and rewelded by a bodyshop!
The indicators from my cluster lights up too! Awesome.
I could have done this in a day but the wiring took me 2 days since I don't have schematics.
Will post pictures soon.
P
R
N
4-D ........shift to "4" and I have O/D !!!
3
2-L
This mod is for my SC400 it should also work for SC300.
As for my SC400 stock shift linkage, I shortened it by 1 inch. Yes I cut it and rewelded by a bodyshop!
The indicators from my cluster lights up too! Awesome.
I could have done this in a day but the wiring took me 2 days since I don't have schematics.
Will post pictures soon.
#9
Last edited by JesLet; 05-01-08 at 11:47 AM.