2jzge from a Gs300 to a Sc300
04-23-08, 12:16 PM
#1
Driver
Thread Starter
Join Date: Apr 2008
Location: Colorado
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
2jzge from a Gs300 to a Sc300
The motor code is the same. I wanted to know if there was difference as far as the stock harness. Is it just a plug and play?
I found a 2jzge out of a Gs300 and my Sc300 has rod knock. I just want to drive it at this point.
I found a 2jzge out of a Gs300 and my Sc300 has rod knock. I just want to drive it at this point.
04-23-08, 03:41 PM
#2
Rookie
Join Date: Apr 2008
Location: Florida
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
harness is different, oil pan is different. You can swap the parts over though.
Look around, most GTE swappers sell their 2JZGE complete for around $50-250 dollars. I know i've sold at least 5 of them for around $100 each complete. It's hard to find someone who puts a 2JZGE IN their sc300 lol.
Look around, most GTE swappers sell their 2JZGE complete for around $50-250 dollars. I know i've sold at least 5 of them for around $100 each complete. It's hard to find someone who puts a 2JZGE IN their sc300 lol.
Thread
Thread Starter
Forum
Replies
Last Post
