Whos single????
#31
kinda get the feeling you misunderstood me. 550s are plenty of fuel. no need to go bigger. also why go smaller turbo? the 35r is t3 and spools hella fast.
#32
I'm making 540whp with my 550's. I'm using an AEM though, so I can get more out of the the injectors, but you can make pretty good power with 550's if need be. This is all temporary because fuel system and cams are in my very near future.
#34
Thats a good question my friend. I dont know why I sold it. I sold it to my cousin, so I hooked him up. Ironically I might be buying it back, either that or I will buy a Sc400 and go FI with it but I miss my Sc300...
#35
AWWWW, i would sell mine, but the only thing i would even think about replacing it with would be a SC300 2JZ-GTE or a TT supra.....nothing else beats this car.....let us know when you get a new ride! and good luck
#36
#37
I'm in Alpharetta. I can't complain about the numbers so far, but I want more, lol. My W58 even survived this amount of power, which was very surprising. I just upgraded to V161 though, so that's not a concern anymore. So far, so good though.
#38
hey, what is the power range of the W58 as supposed to the Getreg? i wanna do the manual ocnversion but dont really wanna spend the 5000 on a getreg, will the W58 hold my power?
keep the pics coming guys, i know theres more singles on here!
keep the pics coming guys, i know theres more singles on here!
#39
How much power are you making? It held mine but I was REALLY nice to it. I highly doubt it would've handled a launch with the power I'm making, but roll ons were just fine. If you're using the SC's pumpkin/gearing, than it's gonna rev a bit high at highway speeds. It actually annoyed me how high it revved at cruising speeds, so I'm looking forward to saving some gas now with a 6th gear. So depending on how you drive and how much power you're making will determine if it'll hold. It held with my setup though for the past 5 months.
#40
How much power are you making? It held mine but I was REALLY nice to it. I highly doubt it would've handled a launch with the power I'm making, but roll ons were just fine. If you're using the SC's pumpkin/gearing, than it's gonna rev a bit high at highway speeds. It actually annoyed me how high it revved at cruising speeds, so I'm looking forward to saving some gas now with a 6th gear. So depending on how you drive and how much power you're making will determine if it'll hold. It held with my setup though for the past 5 months.
#41
Well, with little bigger injectors you'll be able to push the car little more. GT35R spools fast but naturally smaller turbos will spool faster and could provide you with 5xx rwhp in a similar matter.
#42
not sure, my tranny starting slipping when i put the T67DBB on. so im not sure, never got a chance to fully tune this beast. So im guessing about 400-430 somewhere in there. So the W58 is good to go? thanks bro.
#43
old and dirty picture that i took just for proof @ that time, but i still don't have a new one, lol.
gt4067
65lb inj's
using s-afc, although i have a power fc(i've posted about the issues i'm having with it)
r154
gt4067
65lb inj's
using s-afc, although i have a power fc(i've posted about the issues i'm having with it)
r154
#45
here is mine but the engine bay shot is crappy. i will post more soon.
im running
carillo h beams
cp pistons .40 oversize
+1mm over intake and exhaust valves
heavy porting work
272 cams
boostlogic coated manifold
tial 44mm wg
hks race bov
th400trans by virtual works and more
hypertune intake manifold and tb
1000cc injectors and 3 pumps and a -10 supply line
hks dli
and TONS more
im running
carillo h beams
cp pistons .40 oversize
+1mm over intake and exhaust valves
heavy porting work
272 cams
boostlogic coated manifold
tial 44mm wg
hks race bov
th400trans by virtual works and more
hypertune intake manifold and tb
1000cc injectors and 3 pumps and a -10 supply line
hks dli
and TONS more