Who has aftermarket cams?
05-29-08, 04:22 PM
#17
I currently run HKS 272s in a distributorless NA head using a dual-pole Hall Effect sensor for both cam and crank. My AEM EMS is modifed to accept the Hall Effect inputs.
I had 264s in there last year and actually prefer them over the 272s; unfortunately, I've been too busy with other aspects of the car to switch back.
-scott
I had 264s in there last year and actually prefer them over the 272s; unfortunately, I've been too busy with other aspects of the car to switch back.
-scott
05-30-08, 10:29 AM
#21
MVP Motorsports has the line on V8 VVt-I cams. From mild upgrades to massive lift and duration. Here's pics...
The profile is an aggressive .370 lift, 234 @ .050 duration. We have 6 profiles available, and this one was the middle of the road.
208@ .050, .354 lift
218@ .050, .356 lift
226@ .050, .360 lift
234@ .050, .368 lift (the grind pictured below)
227@ .050, .400 lift
230@ .050, .406 lift
The profile is an aggressive .370 lift, 234 @ .050 duration. We have 6 profiles available, and this one was the middle of the road.
208@ .050, .354 lift
218@ .050, .356 lift
226@ .050, .360 lift
234@ .050, .368 lift (the grind pictured below)
227@ .050, .400 lift
230@ .050, .406 lift
Thread
Thread Starter
Forum
Replies
Last Post
CA562
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
2
09-30-12 05:45 PM
