When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i bought one of these for my drag sc project on the first group buy. it did the job but, we ran into problems with lines slipping off of the bottom of the plate once under high pressure under boost. overall not a bad deal for the $$,just the nipples sticking out the top plate (bottom tank side) need to be scuffed or notched if possible.
I hear ya' Ben. This is the modification we came up with. We grooved the posts to keep the hoses on. To date it's been tested to 100psi. The next batch of SC hangers will feature these posts.
I hear ya' Ben. This is the modification we came up with. We grooved the posts to keep the hoses on. To date it's been tested to 100psi. The next batch of SC hangers will feature these posts.
Eric
yeah to bad i found out so late about that, it would have made the tracing the problem much easier.
Hey Eric, call me over the weekend about this will ya?
Thanks,
Ryan
Originally Posted by c0wboy
I hear ya' Ben. This is the modification we came up with. We grooved the posts to keep the hoses on. To date it's been tested to 100psi. The next batch of SC hangers will feature these posts.
It's funny to read this after having the same problem last weekend. I had a problem with the fuel line popping off. Got stuck in 110 degree Vegas sunshine having to reinstall the fuel line.
Good luck on the next batch.
For everyone asking, twin Denso pumps from the Supra TT will NOT fit in your SC.
Will not fit what, your hanger? Twin Denso pumps are running my fuel system right now in my sc on the stock hanger, off course its modified like the stock TT hanger, but it work perfectly fine.
I hear ya, man. But remember too that drawings, material, fixtures, and time costs money and on top of that, 10 pieces of anything is nothing in the big scheme of things. Now if we'd be making these for domestic platforms to the tune of 100 or 1000 at time, then obviously we can adjust the price, but honestly 10 pieces per run means we have to get hardnosed on the pricing.
Thanks man, hit me up via AIM sometime, I haven't chatted with you in a while.
For everyone asking, twin Denso pumps from the Supra TT will NOT fit in your SC.
Please explain.
The TTC aka Cowboy hanger is designed for twin walbros and not twin supra tt/denso pumps. i'm running twin denso pumps right now on my stock modded hanger.
The TTC aka Cowboy hanger is designed for twin walbros and not twin supra tt/denso pumps. i'm running twin denso pumps right now on my stock modded hanger.
Thanks for the info.
POS Walbro is not an option...
Sounds like I need to mod my hanger to fit two Denso pumps.