madmax98

just pulled my motor out to drop in a GTE block and found the top portion of my mount completely separated. Is the MKIV mount the right one to get or earlier years are better, i saw somebody in a thread using the mkIII one. Help is greatly apprciated.

Peter_95

iTrader: (2)

yo whats up doode..! well, i would post on the performance side for better feedback.. Good luck!

souljah798

iTrader: (2)

I'm runnin mkiv brackets and mounts

madmax98

do you have to have the brackets, can i just use my sc brackets?

aliga

iTrader: (147)

you can use either bracket with the matching mount.

the newer engine mounts are cheaper than the older mounts.

madmax98

what exactly do you mean by "matching mounts"? do you mean i cant use the SC brackets with the supra mounts?

madmax98

news, the SC brackets don't even fit on the gte block i have!!!!

aliga

iTrader: (147)

what i meant is the folllowing:

if you have older mounts 93-96, you will need older brackets.

i have a set of older brackets (no mounts). 100 shipped for the pair.

madmax98

I have a 98 SC300, i also found that passenger bracket is off on one of the holes!

aliga

iTrader: (147)

so get the older brackets with older mounts, problem solved.

AngrySC3

What year is your GTE I used stock ge mount and it fit.

madmax98

it came from pre 98 aristo, i ordered 98 mount and bracket for a supra, hopefully it will work out

AngrySC3

i use stock sc bracket and supra 98 mount.