Shern's W58 to R154 swap thread
#1
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
BACKGROUND
First, I'd like to thank the Club Lexus Community for the wealth of knowledge provided for DIYers.![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
I purchased a MK3 R154 about 6 months ago for a decent price: $350. I had intentions on tackling the R154 swap this summer. There was no rush since my W58 ran fine. However, a few months ago, my clutch started slipping and my rear main seal started leaking at the same time. Go figure. All of a sudden, the R154 swap was mandatory. However, I pushed it off a few months for Toyotafest and the Dub Show (PHX). I barely got the car home from Dub Show.![EEK!](https://www.clublexus.com/forums/images/smilies/eek1.gif)
DETAILS
As mentioned, I did a TON of pre-work for the swap. With all of the research, here is what I settled on from a parts point of view.
SHIFTER EXTENSION
Everybody eyeing the R154 swap into the SC knows the complications surrounding the shifter location. Because my W58 was a pre-96 swan style shifter, the only option for me was to do with right with the Soarer extension. I was able to acquire the two parts to retrofit the transmission to the Soarer extended shifter.
Part Numbers:
Here are the two parts and the original lever for comparison:
![Name: IMG_2807.jpg
Views: 8213
Size: 66.7 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456171d1501791993-shern-s-w58-to-r154-swap-thread-img_2807.jpg)
Here is what the transmission looked like after I swapped the parts in:
![Name: IMG_2808.jpg
Views: 10386
Size: 68.4 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456172d1501791993-shern-s-w58-to-r154-swap-thread-img_2808.jpg)
SPEED SENSOR
For those that may not know, the Supra MK3 used a mechanical speed sensor with a cable to the speedo cluster. The SC300 uses an electrical speed sensor. Below, you can see the two speed sensors.
The Mk3 R154 has a tiny little external bracket that holds the sensor in, the W58 has the bracket attached
![Name: speed.jpg
Views: 7117
Size: 9.8 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456173d1501791993-shern-s-w58-to-r154-swap-thread-speed.jpg)
There has been talk on multiple forums about people using the W58 electrical speed sensor on the R154 while creating a bracket to hold it in. That was the original plan for me. However, the number of teeth between the R154 did not line up with the number of teeth on the W58 (33 teeth vs. 32 teeth). Therefore, I decided to use the Marlin Crawler mechanical to electrical speed sensor adapter. Apparently, it screws right onto the mechanical sending unit and converts it to the 3 wire electrical speed sensor wiring on most Toyotas.
Marlin Crawler mechanical to electrical speed sensor adapter
![Name: marlincrawler.jpg
Views: 7442
Size: 27.8 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456174d1501791993-shern-s-w58-to-r154-swap-thread-marlincrawler.jpg)
TEAR DOWN
Here is the SC on DONK status without the 30s:
![Name: IMG_2795.jpg
Views: 6868
Size: 53.4 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456175d1501791993-shern-s-w58-to-r154-swap-thread-img_2795.jpg)
Here is the full exhaust system removed for access to the transmission:
![Name: IMG_2797.jpg
Views: 6838
Size: 61.9 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456176d1501791993-shern-s-w58-to-r154-swap-thread-img_2797.jpg)
Harbor Freight Transmission Jack! Worth it's weight in gold!
First, I'd like to thank the Club Lexus Community for the wealth of knowledge provided for DIYers.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
I purchased a MK3 R154 about 6 months ago for a decent price: $350. I had intentions on tackling the R154 swap this summer. There was no rush since my W58 ran fine. However, a few months ago, my clutch started slipping and my rear main seal started leaking at the same time. Go figure. All of a sudden, the R154 swap was mandatory. However, I pushed it off a few months for Toyotafest and the Dub Show (PHX). I barely got the car home from Dub Show.
![EEK!](https://www.clublexus.com/forums/images/smilies/eek1.gif)
DETAILS
As mentioned, I did a TON of pre-work for the swap. With all of the research, here is what I settled on from a parts point of view.
- Used Mk3 7M R154 transmission
- Used MK3 front half drive shaft
- Used Mk3 release hub
- Brand New OEM JZ-R154 flywheel
- Brand new OEM JZ-R154 bellhousing
- Brand new OEM Rear Main Seal
- Brand new OEM flywheel and pressure plate bolt set
- Brand new ACT Heavy Duty Clutch Kit w/ 6 puck sprung disk Model #TS2-HDG6
- Brand new OEM Soarer shifter extension for swan style shifter
Thanks Blizzy
- Brand new OEM Mk3 slave cylinder
- Brand new OEM washers, wave washers and clips for throwout bearing
- Brand new OEM Mk3 hard clutch line and hose
SHIFTER EXTENSION
Everybody eyeing the R154 swap into the SC knows the complications surrounding the shifter location. Because my W58 was a pre-96 swan style shifter, the only option for me was to do with right with the Soarer extension. I was able to acquire the two parts to retrofit the transmission to the Soarer extended shifter.
Part Numbers:
- Housing, Shifter 33521-24040
- Control Shift Lever 33570-24010
Here are the two parts and the original lever for comparison:
![Name: IMG_2807.jpg
Views: 8213
Size: 66.7 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456171d1501791993-shern-s-w58-to-r154-swap-thread-img_2807.jpg)
Here is what the transmission looked like after I swapped the parts in:
![Name: IMG_2808.jpg
Views: 10386
Size: 68.4 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456172d1501791993-shern-s-w58-to-r154-swap-thread-img_2808.jpg)
SPEED SENSOR
For those that may not know, the Supra MK3 used a mechanical speed sensor with a cable to the speedo cluster. The SC300 uses an electrical speed sensor. Below, you can see the two speed sensors.
The Mk3 R154 has a tiny little external bracket that holds the sensor in, the W58 has the bracket attached
![Name: speed.jpg
Views: 7117
Size: 9.8 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456173d1501791993-shern-s-w58-to-r154-swap-thread-speed.jpg)
There has been talk on multiple forums about people using the W58 electrical speed sensor on the R154 while creating a bracket to hold it in. That was the original plan for me. However, the number of teeth between the R154 did not line up with the number of teeth on the W58 (33 teeth vs. 32 teeth). Therefore, I decided to use the Marlin Crawler mechanical to electrical speed sensor adapter. Apparently, it screws right onto the mechanical sending unit and converts it to the 3 wire electrical speed sensor wiring on most Toyotas.
Marlin Crawler mechanical to electrical speed sensor adapter
![Name: marlincrawler.jpg
Views: 7442
Size: 27.8 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456174d1501791993-shern-s-w58-to-r154-swap-thread-marlincrawler.jpg)
TEAR DOWN
Here is the SC on DONK status without the 30s:
![Name: IMG_2795.jpg
Views: 6868
Size: 53.4 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456175d1501791993-shern-s-w58-to-r154-swap-thread-img_2795.jpg)
Here is the full exhaust system removed for access to the transmission:
![Name: IMG_2797.jpg
Views: 6838
Size: 61.9 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456176d1501791993-shern-s-w58-to-r154-swap-thread-img_2797.jpg)
Harbor Freight Transmission Jack! Worth it's weight in gold!
![Name: IMG_2800.jpg
Views: 7266
Size: 49.8 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456177d1501791993-shern-s-w58-to-r154-swap-thread-img_2800.jpg)
Last edited by shern; 06-29-09 at 07:07 AM.
#2
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Mk3 propeller half-shaft vs. SC300 half-shaft. The Mk3 is the chode and a hair shorter.
![Name: IMG_2798.jpg
Views: 7793
Size: 49.2 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456178d1501791993-shern-s-w58-to-r154-swap-thread-img_2798.jpg)
![Name: IMG_2799.jpg
Views: 6609
Size: 55.0 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456179d1501791993-shern-s-w58-to-r154-swap-thread-img_2799.jpg)
W58 vs. R154
Here you can see the differences between the two transmissions. The R154 with the Soarer extension places the shifter in the exact location as the W58. The hole should line up exactly.![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
W58 pulled on that magical Harbor Freight Transmission Jack
![Name: IMG_2801.jpg
Views: 7998
Size: 60.7 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456180d1501791993-shern-s-w58-to-r154-swap-thread-img_2801.jpg)
W58 vs. R154
![Name: IMG_2809.jpg
Views: 13123
Size: 55.2 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456181d1501791993-shern-s-w58-to-r154-swap-thread-img_2809.jpg)
W58 shifter
![Name: IMG_2810.jpg
Views: 6808
Size: 66.9 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456182d1501791993-shern-s-w58-to-r154-swap-thread-img_2810.jpg)
R154 Soarer shifter extension
![Name: IMG_2811.jpg
Views: 6490
Size: 68.1 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456183d1501791993-shern-s-w58-to-r154-swap-thread-img_2811.jpg)
New Rear Main Seal and Pilot Bearing
![Name: IMG_2805.jpg
Views: 7316
Size: 81.7 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456184d1501791993-shern-s-w58-to-r154-swap-thread-img_2805.jpg)
New JZ-R154 flywheel with new OEM flywheel bolts (loctite'd and sealed)
![Name: IMG_2798.jpg
Views: 7793
Size: 49.2 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456178d1501791993-shern-s-w58-to-r154-swap-thread-img_2798.jpg)
![Name: IMG_2799.jpg
Views: 6609
Size: 55.0 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456179d1501791993-shern-s-w58-to-r154-swap-thread-img_2799.jpg)
W58 vs. R154
Here you can see the differences between the two transmissions. The R154 with the Soarer extension places the shifter in the exact location as the W58. The hole should line up exactly.
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
W58 pulled on that magical Harbor Freight Transmission Jack
![Name: IMG_2801.jpg
Views: 7998
Size: 60.7 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456180d1501791993-shern-s-w58-to-r154-swap-thread-img_2801.jpg)
W58 vs. R154
![Name: IMG_2809.jpg
Views: 13123
Size: 55.2 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456181d1501791993-shern-s-w58-to-r154-swap-thread-img_2809.jpg)
W58 shifter
![Name: IMG_2810.jpg
Views: 6808
Size: 66.9 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456182d1501791993-shern-s-w58-to-r154-swap-thread-img_2810.jpg)
R154 Soarer shifter extension
![Name: IMG_2811.jpg
Views: 6490
Size: 68.1 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456183d1501791993-shern-s-w58-to-r154-swap-thread-img_2811.jpg)
New Rear Main Seal and Pilot Bearing
![Name: IMG_2805.jpg
Views: 7316
Size: 81.7 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456184d1501791993-shern-s-w58-to-r154-swap-thread-img_2805.jpg)
New JZ-R154 flywheel with new OEM flywheel bolts (loctite'd and sealed)
![Name: IMG_2806.jpg
Views: 6976
Size: 86.1 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456185d1501791993-shern-s-w58-to-r154-swap-thread-img_2806.jpg)
#3
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
CLUTCH
After about a month of research on the "best" clutch kit to use, I decided on the ACT HD clutch kit with 6 puck sprung disk. I went back on forth on the ACT, RPS and HPF Bronze/Ferramic and decided the ACT gave me exactly what I needed at the best price. I am currently at 310wtq on stock twins with intentions of going single in the near future. The ACT HD kit holds 522 lb/ft all day which should be enough even when I go single. Plus, I didn't want to destroy my transmission with something too stiff because I like those 7500rpm drops![Woot](https://www.clublexus.com/forums/images/smilies/woot.gif)
ACT clutch kit with new JZ-R154 flywheel:
![Name: IMG_2803.jpg
Views: 6921
Size: 72.2 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456186d1501791993-shern-s-w58-to-r154-swap-thread-img_2803.jpg)
Below is the throwout bearing / hub assembly installed on the ACT pressure plate. I used all new washers/clips on this install. The clips were a biatoch to get on.
ACT pressure plate with throwout bearing installed
![](http://i483.photobucket.com/albums/rr191/shern4/sc300/R154/IMG_2815.jpg)
Thought you'd like to see my old clutch. It's FINISHED!
After about a month of research on the "best" clutch kit to use, I decided on the ACT HD clutch kit with 6 puck sprung disk. I went back on forth on the ACT, RPS and HPF Bronze/Ferramic and decided the ACT gave me exactly what I needed at the best price. I am currently at 310wtq on stock twins with intentions of going single in the near future. The ACT HD kit holds 522 lb/ft all day which should be enough even when I go single. Plus, I didn't want to destroy my transmission with something too stiff because I like those 7500rpm drops
![Woot](https://www.clublexus.com/forums/images/smilies/woot.gif)
ACT clutch kit with new JZ-R154 flywheel:
![Name: IMG_2803.jpg
Views: 6921
Size: 72.2 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456186d1501791993-shern-s-w58-to-r154-swap-thread-img_2803.jpg)
Below is the throwout bearing / hub assembly installed on the ACT pressure plate. I used all new washers/clips on this install. The clips were a biatoch to get on.
ACT pressure plate with throwout bearing installed
![](http://i483.photobucket.com/albums/rr191/shern4/sc300/R154/IMG_2815.jpg)
Thought you'd like to see my old clutch. It's FINISHED!
![Name: IMG_2804.jpg
Views: 6401
Size: 80.8 KB](https://www.clublexus.com/forums/attachments/performance-and-maintenance/456187d1501791993-shern-s-w58-to-r154-swap-thread-img_2804.jpg)
Last edited by shern; 06-28-09 at 04:29 PM.
Trending Topics
#11
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Never reuse flywheel bolts. Not sure if they are Torque-To-Yield but it's not a wise thing especially considering they are so cheap.