will a mk4 torque converter fit my 1jz/a340e swapped sc300?
10-22-09, 11:52 PM
#1
Driver
Thread Starter
Join Date: Jan 2007
Location: nc
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
will a mk4 torque converter fit my 1jz/a340e swapped sc300?
i have a 95 sc300 with 1jz/340e swap. i got the motor and trans from jhot and everything went great. i have had the swap in for about 1.5 years with no issues.
I would like to get a higher rpm stall and would like to know which one to order.
Can I get one for a mk4 and it bolt right up?
i have a t61 with .86 hot side on the motor.
im thinking of getting the 3800rpm titan motorsports stall.... but its for a mk4.
that rpm stall might be a touch high for a DD but im thinking becase of the lower 2.5l 1jz the stall will be a little lower on my motor anyway.
im shooting for street strip feel... and yes i have big a cooler installed on the car.
Thanks for your help.
I would like to get a higher rpm stall and would like to know which one to order.
Can I get one for a mk4 and it bolt right up?
i have a t61 with .86 hot side on the motor.
im thinking of getting the 3800rpm titan motorsports stall.... but its for a mk4.
that rpm stall might be a touch high for a DD but im thinking becase of the lower 2.5l 1jz the stall will be a little lower on my motor anyway.
im shooting for street strip feel... and yes i have big a cooler installed on the car.
Thanks for your help.
Thread
Thread Starter
Forum
Replies
Last Post
