help engine code dtc13
02-16-10, 03:35 PM
Lead Lap
Thread Starter
Join Date: May 2008
Location: Nevada
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
help engine code dtc13
i know its a RPM code but what dose it mean? thnx in advance
02-16-10, 03:38 PM
Retired
Join Date: May 2007
Location: NY
Posts: 12,362
cam position sensors are bad, crank position sensor is bad, or timing is off.
02-16-10, 03:45 PM
Lead Lap
Thread Starter
Join Date: May 2008
Location: Nevada
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
timing was done about 15K ago so not that
02-16-10, 03:49 PM
Retired
Join Date: May 2007
Location: NY
Posts: 12,362
check the resistance and see if its in spec.
02-16-10, 04:05 PM
Lead Lap
Thread Starter
Join Date: May 2008
Location: Nevada
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
okay cool not to spoon feed myself here but dose any one have a diagram or the general area I will find the 2
02-16-10, 04:11 PM
Driver School Candidate
Join Date: Feb 2010
Location: Ar
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
02-16-10, 04:24 PM
Lead Lap
Thread Starter
Join Date: May 2008
Location: Nevada
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
02-16-10, 04:42 PM
Driver School Candidate
Join Date: Feb 2010
Location: Ar
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
02-16-10, 06:31 PM
Lexus Champion
Join Date: Jun 2007
Location: ca
Posts: 2,150
Likes: 0
Happened to me, my pass side cam sensor pickup. Check for resistance, I believe that should help. I drove with it for like a year. On cold nights it would go away!
02-16-10, 06:47 PM
Lead Lap
Thread Starter
Join Date: May 2008
Location: Nevada
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
tank tey lord the sensors or right there on the top vs in some hole that takes 9 hrs to get to
02-16-10, 08:46 PM
Retired
Join Date: May 2007
Location: NY
Posts: 12,362
still gotta get to the distributor housing to replace it lol.
02-18-10, 12:44 AM
Lead Lap
Thread Starter
Join Date: May 2008
Location: Nevada
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
on the crank right? the cams are on top
03-03-10, 10:47 PM
Lead Lap
Thread Starter
Join Date: May 2008
Location: Nevada
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
ahh i know what you mean now its not the greatest place. well the resistance is in spec so I'm hoping it goes away with the bad tranny being rebuilt....... i doubt it though wheres the crank sensor?
03-03-10, 11:07 PM
Retired
Join Date: May 2007
Location: NY
Posts: 12,362
next to the crank pulley..if u look on the side of the pulley, you'll see a connector.
03-05-10, 10:11 PM
Lead Lap
Thread Starter
Join Date: May 2008
Location: Nevada
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
03-03-10, 10:47 PM
