Na-t she woke up this morning
#1
Lexus Test Driver
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
After 6 months being dead she finally woke up at 2:25AM this morning ![Woohoo](https://www.clublexus.com/forums/images/smilies/woohoo.gif)
She started right up after 6 months from a major surgery,i don't know what to say
After 3 different setups finally got what wanted.
![Woohoo](https://www.clublexus.com/forums/images/smilies/woohoo.gif)
She started right up after 6 months from a major surgery,i don't know what to say
![Crying](https://www.clublexus.com/forums/images/smilies/Peace.gif)
After 3 different setups finally got what wanted.
Last edited by 99SC42; 04-10-10 at 09:54 AM.
Trending Topics
#8
Lexus Test Driver
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I will post the pics, i have alot of pics on my phone but i don't have internet on the phone and i tried to upload them to the computer but it wouldn't sync.
I am going to take alot of pics on the digital camera and upload them.
Ali the 3 wires that goes to the AEM which are Coil1/Coil2 and Coil3 i have to redo them because where you solder the pin to the wire it was kind of fat so it wouldn't slide in the ECU connector, so i had to cut them off and redid the 3 wires which was easy and let me know when you are ready to do yours bart has some of the ecu pins and wires left that you can use.
One shot she fired right up so happy didn't even sleep last night hahaha.
Thanks Ali .
I am going to take alot of pics on the digital camera and upload them.
Ali the 3 wires that goes to the AEM which are Coil1/Coil2 and Coil3 i have to redo them because where you solder the pin to the wire it was kind of fat so it wouldn't slide in the ECU connector, so i had to cut them off and redid the 3 wires which was easy and let me know when you are ready to do yours bart has some of the ecu pins and wires left that you can use.
One shot she fired right up so happy didn't even sleep last night hahaha.
Thanks Ali .
#9
Lexus Champion
iTrader: (10)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I will post the pics, i have alot of pics on my phone but i don't have internet on the phone and i tried to upload them to the computer but it wouldn't sync.
I am going to take alot of pics on the digital camera and upload them.
Ali the 3 wires that goes to the AEM which are Coil1/Coil2 and Coil3 i have to redo them because where you solder the pin to the wire it was kind of fat so it wouldn't slide in the ECU connector, so i had to cut them off and redid the 3 wires which was easy and let me know when you are ready to do yours bart has some of the ecu pins and wires left that you can use.
One shot she fired right up so happy didn't even sleep last night hahaha.
Thanks Ali .
I am going to take alot of pics on the digital camera and upload them.
Ali the 3 wires that goes to the AEM which are Coil1/Coil2 and Coil3 i have to redo them because where you solder the pin to the wire it was kind of fat so it wouldn't slide in the ECU connector, so i had to cut them off and redid the 3 wires which was easy and let me know when you are ready to do yours bart has some of the ecu pins and wires left that you can use.
One shot she fired right up so happy didn't even sleep last night hahaha.
Thanks Ali .
See, you are good at wiring, you just didn't know yet.. lol.
I will let you enjoy your car for a little while before we tackle mine.
I can't believe it fired up on the first try with those injectors and everything.
sounds like success to me.
I've got a new project for the stock ge intake manifold. I think you will like it.
#10
Lexus Test Driver
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Lol no i don't like wiring if i don't have too seriously and you know that man.
We can do yours when decide to replace the HG.
Yes on the first try i was shocked lol Bro ni joke.
Come get the lower runner if you need help with the project let me know.
We can do yours when decide to replace the HG.
Yes on the first try i was shocked lol Bro ni joke.
Come get the lower runner if you need help with the project let me know.
#13
Lexus Test Driver
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Will post pics and Vid
My car is 95 SC3 here is the mods list
2JZGE Botton end
TT headgasket/TT cams/TT cams sensor/TT oil pump/TT crank sensor/TT crank gear wheel/2JZGE VVTi Cylinder Head/VVTi ignitor/VVTi coils/Supertech valve seals/VVTi upper intake manifold/AEM EMS 30-1100 with 5bar Map sensor/ GM IAT sensor/Tail 44mm/HKS SSQV/BILLET 6765S .81AR/R154 rebuilt with MC parts/ ACT xtreme stage 4 632 Lbs TQ/ TT brake/clutch pedals/TT slave cylinder/GS400 3.26 diff/ AEM Wideband/VVTi Water pump/Gates Timing Belt/1000cc low impedance/ Honda civic reistor packs can't remember the rest of the stuff.
Aiming for 615Rwhp on Pump gas around 19PSI my CR is 9.2.1 so i know it could be done!
Thanks for all the support.
My car is 95 SC3 here is the mods list
2JZGE Botton end
TT headgasket/TT cams/TT cams sensor/TT oil pump/TT crank sensor/TT crank gear wheel/2JZGE VVTi Cylinder Head/VVTi ignitor/VVTi coils/Supertech valve seals/VVTi upper intake manifold/AEM EMS 30-1100 with 5bar Map sensor/ GM IAT sensor/Tail 44mm/HKS SSQV/BILLET 6765S .81AR/R154 rebuilt with MC parts/ ACT xtreme stage 4 632 Lbs TQ/ TT brake/clutch pedals/TT slave cylinder/GS400 3.26 diff/ AEM Wideband/VVTi Water pump/Gates Timing Belt/1000cc low impedance/ Honda civic reistor packs can't remember the rest of the stuff.
Aiming for 615Rwhp on Pump gas around 19PSI my CR is 9.2.1 so i know it could be done!
Thanks for all the support.
#15
Lexus Test Driver
Thread Starter
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Got some bad news, last night i bled the clutch system and the pedal doesn't feel right so i will pulling the TT brake and clutch pedals annd just get the lexus one.
The brake pedal doesn't even work.
The brake pedal doesn't even work.