Help! 1jzgte issue (daily driver)
#17
Driver
Thread Starter
Join Date: Nov 2009
Location: Florida
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
yeah im hoping thats all it is, driftmotion will have it tuesday morning, ill take monday/wed (work tues) to clean up some of the wiring and engine bay. i need to find a layout of the pins for the ecu and for the body plugs. theres a body plug thats been spliced into on one of the wires and isnt connected to anything, its a small green wire with a yellow line, and theres andother one coming from the binded wiring of the harness thats black/yellow thats not connected as well. from the ecu is a yellow wire that goes to the dakota signal interface, but im 95% sure thats the speedometer/tach interface. Thanks for all your help thus far guys, what a headache.
i got a new sound last night. it was out of limp mode for a couple minutes and when it hit boost i hear a noise from under the dash or in the bay (cant decipher) from behind the passenger airbag area.. that sounds like a air compressor motor starting up.. in a bad way.. that might be a whole nother plethora of things
i got a new sound last night. it was out of limp mode for a couple minutes and when it hit boost i hear a noise from under the dash or in the bay (cant decipher) from behind the passenger airbag area.. that sounds like a air compressor motor starting up.. in a bad way.. that might be a whole nother plethora of things
Thread
Thread Starter
Forum
Replies
Last Post