Tilt steering repair
#153
#154
Pole Position
Join Date: Jul 2006
Location: Tis the season for cheesin
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
The Metal thing can't come off. I think I need an adjustable wrench. because I've tried 3/8, 7/16 and it's either too big or too small.
My tilt doesn't go up or down because the wheel is unaligned with the screw above it.
My tilt doesn't go up or down because the wheel is unaligned with the screw above it.
#156
Driver School Candidate
Join Date: Oct 2008
Location: il
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I just took a chance on buying a 95sc 400 with 175K on it. I knew it needed work. With the help of this forum I was able fix my tilt steering. Thanks so much for the information!
Frank![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
Frank
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
#158
Lexus Champion
iTrader: (10)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
sounds like your connection to the switch is bad or the motor is not going into reverse.
when you press it to go down, do you hear anything happening?
if the screw does not move at all, ur right, that would not be a centering issue.
generally if an electric motor spins one way, it should be just fine spinning the other direction when the polarity is reversed. So then i would check the connectors.
If for some reason two seperate motors are used for up and down which seems rather silly to me, it could be either the motor or connection or both.
when you press it to go down, do you hear anything happening?
if the screw does not move at all, ur right, that would not be a centering issue.
generally if an electric motor spins one way, it should be just fine spinning the other direction when the polarity is reversed. So then i would check the connectors.
If for some reason two seperate motors are used for up and down which seems rather silly to me, it could be either the motor or connection or both.
#161
Driver School Candidate
Join Date: Feb 2007
Location: Ca.
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Wow, I feel ripped off. I read several posts that claim they spent anywhere from .27 cents to .99 cents on garden hose washers. I just spent a whopping 1.99 plus CA. sales tax for a grand total of $2.15. Although there were 10 garden hose washers in the package, I'm still slightly green with envy.
By the way, the fix worked perfectly well. I had a grinding noise when ever I tried to lower my wheel. It eventually got to the point where it would telescope both directions, go up, left and right--and would grind profusely when trying to tilt down.
Carefully pulled everything off and I only needed two washers behind the blue gear. Works well...Thanks c_irie and the rest of CL!!!
By the way, the fix worked perfectly well. I had a grinding noise when ever I tried to lower my wheel. It eventually got to the point where it would telescope both directions, go up, left and right--and would grind profusely when trying to tilt down.
Carefully pulled everything off and I only needed two washers behind the blue gear. Works well...Thanks c_irie and the rest of CL!!!