Fastest Stock Framed SC300 (no tube chassis or ford rear ect)
09-30-10, 06:42 PM
#31
Driver School Candidate
iTrader: (1)
Join Date: Oct 2009
Location: Charleston SC
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! Yeah, keep going back and forth about putting it up for sale. I maybe just keep it, not sure. I would like to fix up a old car (pre 1966) as its a pain dealing with smog and police with modified cars around here. Probably 90% chance it will have a 2jz and th400 or powerglide combo.
Lawrence
Lawrence
11-02-10, 05:47 PM
#34
Thanks guys!
set up is very simple acually.
Just a non special Na-t
Built bottom end
Built and ported head with custom 280 cams (to keep the distributor)
TH400 with Neil Chance converter
Stock intake and throttle body
TT auto diff
DBB 76gts
Bl manifold and intercooler
100 shot to spool only
E-85+ 3 nozzle meth injection @ 32psi of boost
AEM ems
twin denso pumps, 2150cc inectors etc..
Stock OEM cap, rotor,and wires + HKS dli
I plan on spraying it for a full pass (100 shot or 150shot) very soon to hopefully get into the low 9's at 150+
The car is fully certed and legal to go 8.50 although I will never get it to do that. She is getting ready to go on the market soon as I just freshened the motor up!
Lawrence
set up is very simple acually.
Just a non special Na-t
Built bottom end
Built and ported head with custom 280 cams (to keep the distributor)
TH400 with Neil Chance converter
Stock intake and throttle body
TT auto diff
DBB 76gts
Bl manifold and intercooler
100 shot to spool only
E-85+ 3 nozzle meth injection @ 32psi of boost
AEM ems
twin denso pumps, 2150cc inectors etc..
Stock OEM cap, rotor,and wires + HKS dli
I plan on spraying it for a full pass (100 shot or 150shot) very soon to hopefully get into the low 9's at 150+
The car is fully certed and legal to go 8.50 although I will never get it to do that. She is getting ready to go on the market soon as I just freshened the motor up!
Lawrence
11-02-10, 08:16 PM
#35
Lead Lap
iTrader: (4)
Join Date: Sep 2007
Location: NM
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
there are a bunch already, there is a 67 camaro with a built 2jz over 1000hp too, evsmotorsports i think
http://www.youtube.com/watch?v=IZqtJTlXON8
http://www.youtube.com/watch?v=IZqtJTlXON8
11-03-10, 07:00 PM
#36
Driver
Thread Starter
11-03-10, 07:01 PM
#37
Driver
Thread Starter
06-11-11, 11:28 AM
#40
Driver
Thread Starter
Anybody have any faster times lately? I get my new pistons back tues and engine will be back together and back in the Lexus by that weekend, then 600cc bigger injectors, bigger fuel rail, going from 76mm gt4276 journal bearing to a 80.8mm gt4508r dbb. I might sell it and buy a buddies gt4780 (I think) and keep from having to red rill the coolant line I welded closed. Then a new tune and faster times. I ran the 9.40 in the 1/4 with a 2 speed trans and blew the intercooler pipe off when switching to 2nd. It was about 3/4's of a pass so with this setup it should be in the 8's.... Cross your fingers...lol
04-03-12, 01:12 AM
#42
Driver
Thread Starter
Just caught wind of 2 new records for 1st and 2nd places, any other new times out there?
*1. 8.22 @ 174 - T perf -GTE, 76mm, TH400, Electromotive, 3640lbs raceweight
**2. 9.23 @ 163 - Dynosaur Performance in Texas, gt4780 and huge diet
3. 9.36 @ 151 - TurboB6 - HKS 3.4L, GT47-88, Powerglide, Motec (1.6 60')
4. 9.38 @ 147 - turbo6 - GE w/GTE head, Powerglide, Tec3
5. 9.40 @ 147- Armyastro - GTE Powerglide 76mm Aem 1.52 60'
6. 9.44 @ 145 - M34LNCH - GTE, TH400, 76mm, AEM
*1. 8.22 @ 174 - T perf -GTE, 76mm, TH400, Electromotive, 3640lbs raceweight
**2. 9.23 @ 163 - Dynosaur Performance in Texas, gt4780 and huge diet
3. 9.36 @ 151 - TurboB6 - HKS 3.4L, GT47-88, Powerglide, Motec (1.6 60')
4. 9.38 @ 147 - turbo6 - GE w/GTE head, Powerglide, Tec3
5. 9.40 @ 147- Armyastro - GTE Powerglide 76mm Aem 1.52 60'
6. 9.44 @ 145 - M34LNCH - GTE, TH400, 76mm, AEM
Last edited by armyastro; 04-15-12 at 04:12 PM.
04-03-12, 06:38 AM
#44
Driver
Thread Starter
[quote=armyastro;5690872]Reply or PM me with your best time at the track, and all relevant information (GE or GTE, transmission, turbo, weight, engine management, etc.) This is for ClubLexus JZ-powered SC's only. If someone would like to start a V8 list as well feel free.[/QUOTE]
Lq4 is a chevy/gm truck motor for a hd silverado, yukon ect. you have any pics or videos of it? sounds like a nice swap
Lq4 is a chevy/gm truck motor for a hd silverado, yukon ect. you have any pics or videos of it? sounds like a nice swap
