I have a doner 89 supra tubo car for my sc300 drift car. need to know what i can use.
#1
Rookie
Thread Starter
Join Date: Jan 2011
Location: SD.
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
I have a doner 89 supra tubo car for my sc300 drift car. need to know what i can use.
hello all i am new here and new to drifting but not new to racing. i am an ex AMA motorcycle road racer. but now i want to try my hand at drifting. i have a 93 sc300 1jzgtte (it is a stock twin turbo motor w/ the ecu from japan so i think it is called a 1jzgtte) the car is an auto and i need it to get a swap to 5 speed. so i got my hands on a 89 supra turbo module. i know i cant use the ecu, but i will be taking the r154 trans, pedals, clutch (i think or can i not because it is the 7 m motor). i guess what i am asking is what else can i use (just a bolt up per-say) like rear end? any and all help would be great. and i will post pic of all work because i know i will be asking alot of questions.
#4
Lexus Champion
iTrader: (12)
The trans itself will work, but will need a shifter extension, bellhousing, clutch, and flywheel specific to the 1jz. The pedals wont work, neither will the rear end from the Supra, so you will have to source these from an SC. You will need the front section of the Supra driveshaft combined with a manual SC300 rear driveshaft section.
Trending Topics
#8
Rookie
Thread Starter
Join Date: Jan 2011
Location: SD.
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
yes i did see all the other treads. but i wanted to know what i can use from the supra.
#11
Rookie
Thread Starter
Join Date: Jan 2011
Location: SD.
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post