milkyninja

i can't find the sizes of the 2jz bellhousing bolts with a w58 transmission. the only thing i found is the sizes of a 2jz block and 1jz bellhousing which are There are four 10mm x 1.25 x40mm, five 12mm x 1.25 x 50mm, and two 10mm x 1.25 x 70mm (starter). i read somewhere els that the bellhousings are the same though. just the gearbox to the bellhousing is different. someone chime in and get me on my way please? thanks!!

milkyninja

anybodyzz? :/

TLDriver

iTrader: (4)

I used my #jz/w58 bolts on my #jz/r154 bell housing... should be the same ones on an auto.

milkyninja

im not doing auto to manual swap. im doing 2jz swap in a 240sx. i got the engine and transmission seperately. so there were never any bolts. ill try these ones i just got from advance. thanks for your input.

TLDriver

iTrader: (4)

good luck on the swap and I want to say it will work.