Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Hesitating sc400

Thread Tools
 
Search this Thread
 
Old 01-03-12, 11:10 PM
  #16  
chrisindub
Pole Position
Thread Starter
iTrader: (1)
 
chrisindub's Avatar
 
Join Date: Dec 2011
Location: Pasadena, CA
Posts: 304
Likes: 0
Received 0 Likes on 0 Posts
Default F'in weirdest thing with this car!

OK, check this out

Unplugged my MAF sensor, drove to LA and back (from vegas) ran great, but you can smell it runs a little rich, and with the check engine light on, it negates the traction control which i like alot on this car.

So once back in vegas, I plug in my MAF sensor again, and it runs great now, no check engine light, no hesitation.

Maybe it just needed a little flogging to get the bats out of the cave!?

It's only been running good for a day, but the hesitation is completely gone, not even a little hesitation which is a first.

Also, another strange thing, this car previously felt like it had a driveline vibration at 35-40 mph and again at 85-95 mph which is now gone.

I'm still gonna replace the trans mount. Odd coincidence though.

I fear this is not the last you will hear from me about this.
Old 01-13-12, 06:16 PM
  #17  
chrisindub
Pole Position
Thread Starter
iTrader: (1)
 
chrisindub's Avatar
 
Join Date: Dec 2011
Location: Pasadena, CA
Posts: 304
Likes: 0
Received 0 Likes on 0 Posts
Default Seafoam

Finally got around to putting seafoam in my intake.

What a F'in difference! Hesitation is gone. Pulls much harder, better throttle response. Idles lower. Engine feels smoother

Ran in 1/3 a bottle into the PCV valve, let it sit for 15 min then restarted it, gunned it a little at first to get it running again. Ran for another 10min to get it all out.

Smoked up my whole parking lot like a dance club in ibiza.

Haven't put it in my oil or gas tank. Probably will put some in the crankcase tomorrow and let it idle for a little, then change the oil.

Wish i had done this before i started replacing sensors and ignition coils.

I wanna run it through my other cars now.
Old 06-07-12, 06:11 PM
  #18  
chrisindub
Pole Position
Thread Starter
iTrader: (1)
 
chrisindub's Avatar
 
Join Date: Dec 2011
Location: Pasadena, CA
Posts: 304
Likes: 0
Received 0 Likes on 0 Posts
Default

Started bogging like it was missing cylinder again

CEL came on throwing rich/lean codes

Checked all the o2 sensors, no probs, MAF OK, Checked flow from the cats, OK

Still bogging, no idea why

For four tanks of gas, put fuel injector cleaner in with my fills.

The bogging has been gone for a month now

Anyone else have this retardedness?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MikeyB33
Performance & Maintenance
1
06-02-18 04:05 PM
fastoldguy
Performance & Maintenance
14
07-18-13 09:45 AM
ballhooter
Performance & Maintenance
9
10-10-11 12:27 PM
ojas
Performance & Maintenance
4
06-21-06 08:05 PM



Quick Reply: Hesitating sc400



All times are GMT -7. The time now is 04:39 PM.