Piggyback guys: How clean is your closed loop?
#61
I had heard some stories of MS failures before, and blew them off since I had good luck with it. I was still leaning towards MS3 until I saw some people posting up on the MS forums after their injector drivers fried(over and over). After seeing that, I don't have a lot of confidence in MS3. I am leaning towards MapEcu2 or 3 because it is pretty cheap if you find it used, has a lot of features, and it is proven. Plus, I don't want to tune from scratch for my tiny HP goal.
#62
Lexus Test Driver
iTrader: (3)
were those people n00bs trying to run low or medium impedence injectors on their low amp injector drivers without an injector ballast? i hate to sound "elitist," but i must be cynical about this one.
i almost got bit by this when i made my rb26 harness. the rb26 ecu uses medium impedance (~8-10 ohm iirc).
doesn't ms3 have autotune like the haltechs? just drive around and hit the damn target button...
just buy a damn standalone, stockhatch.
i almost got bit by this when i made my rb26 harness. the rb26 ecu uses medium impedance (~8-10 ohm iirc).
doesn't ms3 have autotune like the haltechs? just drive around and hit the damn target button...
just buy a damn standalone, stockhatch.
Last edited by cartmill; 02-23-12 at 02:53 PM.
#65
Lexus Test Driver
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
Adam i am not jump on your thread and tell you what you have already read or others have already told you.
I have never had a piggyback car, i was always standalone from day one when i started building my cars.The best mod i have ever done to my car was EMS.My tune was perfect i get 27 mpg on 600rwhp car, I drove my car everyday for 90 miles round trip.
I know you are not looking for some crazy power and I agree 100% that Map ecu will do it for you since you are already on gte ecu but if you are gonna get the new Map ecu 3, I would get a standalone for $200 more.
I have never had a piggyback car, i was always standalone from day one when i started building my cars.The best mod i have ever done to my car was EMS.My tune was perfect i get 27 mpg on 600rwhp car, I drove my car everyday for 90 miles round trip.
I know you are not looking for some crazy power and I agree 100% that Map ecu will do it for you since you are already on gte ecu but if you are gonna get the new Map ecu 3, I would get a standalone for $200 more.
Thread
Thread Starter
Forum
Replies
Last Post