xspsi6

iTrader: (31)

So I have my diff out and apart (spare) and am rebuilding it with new seals and lsd so I figured why not have everything powder coated?

I am going to powder coat the rear sub frame as well as make some poly bushings for it so the plan is to powder coat everything under the car as well as everything up top in the engine bay as I just dropped off my transmission case today so I can then take it to ATF to have them fully build it to take some abuse!

This is the only pic I have atm but I will update as I get more together pics...
Rear cover


***UPDATED PICS IN POST11***

HiPSI

iTrader: (2)

Nice!!!

You could of just left that cover bare metal just had it media blasted and then coat the diff. Nice attention to detail though I need to have my TRD LSD installed myself but I fear whomever I take it too might not install it correctly

xspsi6

iTrader: (31)

Well I am powder coating the trans case black as well as the diff and just the rear cover is going to be silver to add some contrast

xspsi6

iTrader: (31)

This is the rest of the parts that were done in this run of silver as well.

lilSCsteve

iTrader: (71)

Looks pretty good, the good thing is now you'll be able to easily identify and leaks? Hopefully you won't have any considering those new seals! Smart move!

xspsi6

iTrader: (31)

Haha Yea I am **** about leaks and dirt which is why my friends give me crap about powder coating stuff that you can't see under the car

97-SC300

iTrader: (17)

Nice work,

Are you swapping in a 1JZ (judging by the manifold)?

xspsi6

iTrader: (31)

Yes sir, 1JZ Borg warner s366 on a built auto, Only looking for low 500 whp pump gas.

sakon3

iTrader: (3)

Very Nice!!! Always cheaper to get it all powder coated at once!

scoobySC3

iTrader: (1)

Looks great!

Thanks,
Rick

xspsi6

iTrader: (31)

Thank you!
I got my lower oil pan and some of my transmission parts back today as well

sc400ka

Looks great! I do the same with parts as well. I'm looking for a rear subframe right now. I'm even going to the stitch weld the rear subframe around the mounting areas, And powder coat it so it doesn't rust out again. However didn't think to do my tranny parts! * snap* now I have to do it! Dang

xspsi6

iTrader: (31)

Wow!! I am now doing the exact same thing with the rear subframe! Stitch welding is a good idea as well, If you were closer I would just say I could grab a rust free rear subframe from the yard as they sell for 250 which is about what I paid for mine.

xspsi6

iTrader: (31)

Calipers done today as well.

OG Dada

iTrader: (10)

What color is that? It looks a little pinkish. I brought my LS brakes to the polishing shop today... I hope it comes back really good.