Need help with ECU and AFM obd1--->2 conversion
#1
Need help with ECU and AFM obd1--->2 conversion
Sup guys,
I finally tackled this OBD! (92) to OBD2(96-97)conversion but having a little problem here.
I first got all the wires right, hooked it up and it was running fine, so i got happy .....but when i disconnected the afm and put everything back like it was supposed to , i cross wired the AFM ground and one of the other AFM wire that goes to ECU .
Now after fixing the wire problem, I get the air flow meter code. I changed the AFM but i still get the same code, and it runs like crap(no idle, black smoke)
My question is could i have fried the ECU?
If you gurus whant to know more detailed info like what wires i crossed i have everything , but i made my question basic so it wont take too much of our time.
Please help.
I finally tackled this OBD! (92) to OBD2(96-97)conversion but having a little problem here.
I first got all the wires right, hooked it up and it was running fine, so i got happy .....but when i disconnected the afm and put everything back like it was supposed to , i cross wired the AFM ground and one of the other AFM wire that goes to ECU .
Now after fixing the wire problem, I get the air flow meter code. I changed the AFM but i still get the same code, and it runs like crap(no idle, black smoke)
My question is could i have fried the ECU?
If you gurus whant to know more detailed info like what wires i crossed i have everything , but i made my question basic so it wont take too much of our time.
Please help.
Thread
Thread Starter
Forum
Replies
Last Post