Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

Sc300 fuel system

Thread Tools
 
Search this Thread
 
Old 06-05-13 | 02:32 PM
  #1  
Brianmoss's Avatar
Brianmoss
Thread Starter
Driver
 
Joined: Mar 2013
Posts: 110
Likes: 1
From: Fl
Default Sc300 fuel system

I'm looking into doing a direct power line to the fuel pump since I can't seem to get my fuel pump to come on does anyone have a write up on how to do this?......... I checked every fuse,every relay, did the 12v mod,replaced the fuel pump and I still can't get my cars fuel pump to turn on..... Can someone give me some help?

Last edited by Brianmoss; 06-05-13 at 10:51 PM.
Old 06-05-13 | 05:27 PM
  #2  
Brianmoss's Avatar
Brianmoss
Thread Starter
Driver
 
Joined: Mar 2013
Posts: 110
Likes: 1
From: Fl
Default

Any suggestions or thoughts will help as I've exhausted every search on this forum and any option I had possible please help.

Last edited by Brianmoss; 06-06-13 at 08:07 AM.
Old 06-06-13 | 07:38 AM
  #3  
Ali SC3's Avatar
Ali SC3
Lexus Champion
CL Folding 100000
iTrader: (10)
 
Joined: Oct 2007
Posts: 10,769
Likes: 448
From: CO
Default

the 12v mod should do that, there may be a more direct way but I have not done it. you could even have a bad pump if its not working with the 12v. Also check the fuse for the injectors.
Old 06-06-13 | 08:03 AM
  #4  
Brianmoss's Avatar
Brianmoss
Thread Starter
Driver
 
Joined: Mar 2013
Posts: 110
Likes: 1
From: Fl
Default

Befor I installed the pump I turned it on just to make sure it was working so it's not the pump. I've already gone through every fuse and reley in the engine bay and kick panels it's not one of those either. The only option I have now is to hard wire the pump directly and I need a diagram.
Old 06-07-13 | 06:09 PM
  #5  
Brianmoss's Avatar
Brianmoss
Thread Starter
Driver
 
Joined: Mar 2013
Posts: 110
Likes: 1
From: Fl
Default

Just dropped the car off at the shop couldn't take it anymore. I'll write back with the issue
Old 06-08-13 | 08:37 AM
  #6  
Brianmoss's Avatar
Brianmoss
Thread Starter
Driver
 
Joined: Mar 2013
Posts: 110
Likes: 1
From: Fl
Default

It was the damn ground........ The 3 10mm bolts that hold the fuel pump hanger inplace are also the ground for the fuel pump all I needed to do was wire brush them off and it started right up.
Old 06-08-13 | 09:37 AM
  #7  
1JZPWRD's Avatar
1JZPWRD
1JZ Single SC400
iTrader: (59)
 
Joined: Jan 2009
Posts: 8,518
Likes: 15
From: Alabama, Roll Tide!
Default

Glad you got it figured out.
Old 06-08-13 | 01:28 PM
  #8  
SC400slide's Avatar
SC400slide
In Recovery Mode
CL Folding 25,000
iTrader: (11)
 
Joined: Apr 2012
Posts: 3,871
Likes: 35
From: NM
Default

Those grounds get me almost every time, no kidding. -_- Replacing the tranny, forgot to connect the starter ground. Gave my heart a racing when it didn't even try to turn over.
Old 06-08-13 | 02:51 PM
  #9  
Brianmoss's Avatar
Brianmoss
Thread Starter
Driver
 
Joined: Mar 2013
Posts: 110
Likes: 1
From: Fl
Default

Haha yeah I'm just Upset because now I'm only firing on 4cyl now. No onto the next task....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Desacatao
GS - 2nd Gen (1998-2005)
22
03-03-19 03:09 PM
Silgs300
GS - 2nd Gen (1998-2005)
4
10-15-17 06:38 AM
epicaudio
ES - 1st to 4th Gen (1990-2006)
9
09-01-10 07:18 PM
sc300vroom
SC- 1st Gen (1992-2000)
5
11-07-09 08:31 PM



Quick Reply: Sc300 fuel system



All times are GMT -7. The time now is 08:49 AM.