Supercharging with Fish Bracket...
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2013
Location: SoCal
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Supercharging with Fish Bracket...
Hello I'm James,
I just acquired a Lextreme Fish Bracket V2 for the 1UZFE.
I would like to know what bolts to use for it to mounting. I've been searching but cant find anything definate on that.
Also, I'd like to know what pullies you guys are using on your centrifugal setups. And boost levels with said pullies.
I see that a CCW SC is necessary. And would like to know all the Superchargers that are compatable with the V2 bracket. I've been searching but some of the threads are old as hell and speak on the V1 bracket.
My goals are about 400hp and pretty decent topend. The car weighs about 2800lbs RWD and 6sp manual with a 3.90 rearend with a 93' 1UZFE and standalone ECU.
Any help would be appreciated and would also count towards having current info on this subject.
I just acquired a Lextreme Fish Bracket V2 for the 1UZFE.
I would like to know what bolts to use for it to mounting. I've been searching but cant find anything definate on that.
Also, I'd like to know what pullies you guys are using on your centrifugal setups. And boost levels with said pullies.
I see that a CCW SC is necessary. And would like to know all the Superchargers that are compatable with the V2 bracket. I've been searching but some of the threads are old as hell and speak on the V1 bracket.
My goals are about 400hp and pretty decent topend. The car weighs about 2800lbs RWD and 6sp manual with a 3.90 rearend with a 93' 1UZFE and standalone ECU.
Any help would be appreciated and would also count towards having current info on this subject.
Last edited by 1uzme; 08-30-13 at 11:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
assass1n
SC- 1st Gen (1992-2000)
5
07-25-12 03:13 PM
7MDriver
Performance & Maintenance
11
10-14-08 09:03 AM